Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Outer Door Panel Replacement #WPW10634271 
Kitchenaid Electric Slide-In Range Outer Door Panel Replacement #WPW10634271
Skill Level
Total Parts Cost
$290.58Estimated Savings
$112.5003:18
- Description
This video provides step-by-step instructions for replacing the outer door panel on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the panel is if it is damaged or scratched.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Outer Door Panel Replacement
3
Tools needed: Phillips-head screwdriver or a number two square driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly.
11
Next, unthread the two screws in the upper corners.
12
With the screws unthreaded, lift out the inner door panel.
13
Now unthread the two mounting screws securing the door handle and bracket.
14
Prepare the new outer door panel for installation by aligning the door handle and the bracket, then thread and tighten the mounting screws.
15
Join the inner and outer door panels together.
16
Thread the five screws to secure.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the outer door panel on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the panel is if it is damaged or scratched.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Outer Door Panel Replacement
3
Tools needed: Phillips-head screwdriver or a number two square driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly.
11
Next, unthread the two screws in the upper corners.
12
With the screws unthreaded, lift out the inner door panel.
13
Now unthread the two mounting screws securing the door handle and bracket.
14
Prepare the new outer door panel for installation by aligning the door handle and the bracket, then thread and tighten the mounting screws.
15
Join the inner and outer door panels together.
16
Thread the five screws to secure.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com