Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Anti-Tip Bracket Replacement #W10908063 
Kitchenaid Electric Slide-In Range Anti-Tip Bracket Replacement #W10908063
Skill Level
Total Parts Cost
$27.14Estimated Savings
$112.5002:32
- Description
This video provides step-by-step instructions for replacing the anti-tip bracket on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the bracket is if the range is not secured.
All of the information in this anti-tip bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this anti-tip bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Anti-Tip Bracket Installation
3
Tools needed: 1/8th inch diameter drill bit, measuring tape
4
Shock
5
Make sure the power cord is unplugged and the range has been moved out of the way.
6
We recommend placing the range on a piece of cardboard so the appliance can be easily moved.
7
The anti-tip bracket can be mounted to the wall or the floor.
8
Using measuring tape, determine where the center of the recessed wall opening is and mark it.
9
Position the bracket so the v-notch is exactly twelve-and-a-half inches to the left or right of the centerline.
10
Mark the appropriate bracket holes for floor or wall mounting.
11
Using a 1/8th inch diameter drill bit, drill the holes where marked.
12
Align the anti-tip bracket and secure it with two #10 one and 5/8th inch screws.
13
Heavy
14
Gently move the range close to its final location, then remove the cardboard from underneath the appliance.
15
Plug the range power cord in.
16
Now gently push the range into its final location, making sure the rear leg slides into the anti-tip bracket.
17
To confirm this, place a foot against the warming drawer and, grasping the back of the range, attempt to tilt the range forward.
18
The bracket should immediately prevent the appliance from tipping forward.
Description
This video provides step-by-step instructions for replacing the anti-tip bracket on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the bracket is if the range is not secured.
All of the information in this anti-tip bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this anti-tip bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Anti-Tip Bracket Installation
3
Tools needed: 1/8th inch diameter drill bit, measuring tape
4
Shock
5
Make sure the power cord is unplugged and the range has been moved out of the way.
6
We recommend placing the range on a piece of cardboard so the appliance can be easily moved.
7
The anti-tip bracket can be mounted to the wall or the floor.
8
Using measuring tape, determine where the center of the recessed wall opening is and mark it.
9
Position the bracket so the v-notch is exactly twelve-and-a-half inches to the left or right of the centerline.
10
Mark the appropriate bracket holes for floor or wall mounting.
11
Using a 1/8th inch diameter drill bit, drill the holes where marked.
12
Align the anti-tip bracket and secure it with two #10 one and 5/8th inch screws.
13
Heavy
14
Gently move the range close to its final location, then remove the cardboard from underneath the appliance.
15
Plug the range power cord in.
16
Now gently push the range into its final location, making sure the rear leg slides into the anti-tip bracket.
17
To confirm this, place a foot against the warming drawer and, grasping the back of the range, attempt to tilt the range forward.
18
The bracket should immediately prevent the appliance from tipping forward.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com