Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Inner Door Liner Replacement #W10902192 
Kitchenaid Electric Slide-In Range Inner Door Liner Replacement #W10902192
Skill Level
Total Parts Cost
$212.94Estimated Savings
$112.5005:59
- Description
This video provides step-by-step instructions for replacing the inner door liner on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the liner is if it is damaged or dirty.
All of the information in this door liner replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this door liner replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Inner Door Liner Replacement
3
Tools needed: Phillips-head screwdriver or a Number 2 square drive
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly?
11
Next, unthread the two screws in the upper corners.
12
With the screws unthreaded, lift out the inner door panel.
13
Set the inner panel on a blanket with the hinges facing up.
14
You will now need to uninstall the two hinges.
15
Unthread the two bottom screws first.
16
Unthread the third screw on the outside of the inner door panel and you can fully remove the hinge.
17
Repeat for the opposite side.
18
Fragile
19
Now lift the panel up and place a towel under the glass.
20
You can now unthread the remaining six screws securing the inner door glass brackets.
21
Lift off the inner door liner.
22
Now unthread the three screws to remove the upper trim.
23
Prepare the new door liner for installation by aligning the upper trim and securing it with the screws.
24
Confirm that that the two pieces of glass are aligned on the frame, then position the new inner door liner.
25
Align each glass bracket and thread the screws loosely.
26
Once all of the brackets are in place tighten the screws.
27
Reinstall both door hinges.
28
Join the inner and outer door panels together.
29
Thread the five screws to secure.
30
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
31
Lower the door to its fully open position, then rotate the hinge locks forward.
32
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the inner door liner on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the liner is if it is damaged or dirty.
All of the information in this door liner replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this door liner replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Inner Door Liner Replacement
3
Tools needed: Phillips-head screwdriver or a Number 2 square drive
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly?
11
Next, unthread the two screws in the upper corners.
12
With the screws unthreaded, lift out the inner door panel.
13
Set the inner panel on a blanket with the hinges facing up.
14
You will now need to uninstall the two hinges.
15
Unthread the two bottom screws first.
16
Unthread the third screw on the outside of the inner door panel and you can fully remove the hinge.
17
Repeat for the opposite side.
18
Fragile
19
Now lift the panel up and place a towel under the glass.
20
You can now unthread the remaining six screws securing the inner door glass brackets.
21
Lift off the inner door liner.
22
Now unthread the three screws to remove the upper trim.
23
Prepare the new door liner for installation by aligning the upper trim and securing it with the screws.
24
Confirm that that the two pieces of glass are aligned on the frame, then position the new inner door liner.
25
Align each glass bracket and thread the screws loosely.
26
Once all of the brackets are in place tighten the screws.
27
Reinstall both door hinges.
28
Join the inner and outer door panels together.
29
Thread the five screws to secure.
30
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
31
Lower the door to its fully open position, then rotate the hinge locks forward.
32
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com