Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Warm Zone Element Replacement #W11041453
Kitchenaid Electric Slide-In Range Warm Zone Element Replacement #W11041453
Skill Level
Total Parts Cost
$95.28Estimated Savings
$112.5004:54
- Description
This video provides step-by-step instructions for replacing the warm zone surface element on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the element is if it is not heating.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Warm Zone Radiant Surface Element Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
7
Sharp
8
Remove the cover.
9
Next, unthread the two screws securing the control panel to the frame.
10
Detach the control panel and support it to avoid straining the wires.
11
Now unthread the front bracket screws securing the main top.
12
Unthread the two screws underneath the rear corners of the top.
13
Heavy
14
Pull the main top back and up to remove then set it aside.
15
Detach the warm zone radiant surface element retaining clips from the support panel.
16
Note the orientation of the wires connected to the element terminals and the high-limit thermostat then disconnect them.
17
Prepare the new warm zone radiant surface element for installation by transferring the spring clips from the old element bracket to the new one.
18
Connect the wires to the element terminals and the thermostat.
19
Insert the clips into the slots in the support panel and snap the new element into place.
20
Reposition the main top by sliding the rear edge under the lip of the element support panel, then lower the front edge.
21
Replace all of the screws to secure.
22
Realign the control panel on the front brackets.
23
Secure it with the screws.
24
Replace the lower cover, then thread the screws to secure.
25
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the warm zone surface element on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the element is if it is not heating.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Warm Zone Radiant Surface Element Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
7
Sharp
8
Remove the cover.
9
Next, unthread the two screws securing the control panel to the frame.
10
Detach the control panel and support it to avoid straining the wires.
11
Now unthread the front bracket screws securing the main top.
12
Unthread the two screws underneath the rear corners of the top.
13
Heavy
14
Pull the main top back and up to remove then set it aside.
15
Detach the warm zone radiant surface element retaining clips from the support panel.
16
Note the orientation of the wires connected to the element terminals and the high-limit thermostat then disconnect them.
17
Prepare the new warm zone radiant surface element for installation by transferring the spring clips from the old element bracket to the new one.
18
Connect the wires to the element terminals and the thermostat.
19
Insert the clips into the slots in the support panel and snap the new element into place.
20
Reposition the main top by sliding the rear edge under the lip of the element support panel, then lower the front edge.
21
Replace all of the screws to secure.
22
Realign the control panel on the front brackets.
23
Secure it with the screws.
24
Replace the lower cover, then thread the screws to secure.
25
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com