Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Door/Drawer Handle Replacement #W11104399 
Kitchenaid Electric Slide-In Range Door/Drawer Handle Replacement #W11104399
Skill Level
Total Parts Cost
$106.69Estimated Savings
$112.5006:09
- Description
This video provides step-by-step instructions for replacing the door/drawer handle on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the handle is if it is damaged or missing.
All of the information in this handle replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this handle replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Door/Drawer Handle Replacement
3
Tools needed: Phillips-head screwdriver, pliers
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
If replace the oven door handle, fully open the door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly and the two screws in the upper corners.
11
With the screws unthreaded, lift out the inner door panel.
12
Now unthread the two mounting screws securing the door handle and bracket.
13
Install the new door handle by aligning it on the outer door.
14
Reposition the bracket, then thread and tighten the mounting screws.
15
Join the inner and outer door panels together.
16
Thread the five screws to secure.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
If you?re replacing the warming drawer handle, pull out the drawer and remove the rack.
20
Sharp
21
Next, use pliers to bend the slide rails outward to fully detach the drawer assembly ? this may require some effort.
22
Set the drawer upside down on a sturdy surface.
23
Use the Phillips-head screwdriver or the number two square drive bit to unthread the screws from the bottom of the front panel.
24
Turn the drawer assembly over and remove the top screws.
25
Detach the drawer from the front panel.
26
Sharp
27
Set the insulation and the inner panel aside.
28
You can now unthread the mounting screws to release the old drawer handle.
29
Align the new handle on the panel, reposition the support washers, then thread and tighten the mounting screws.
30
Replace the inner panel and the insulation.
31
Realign the drawer on the front panel and rethread the top screws.
32
Turn the drawer assembly over and rethread the bottom screws.
33
With both slide rails pulled out, align the slots in the drawer assembly with the tabs on the slide rails and snap the assembly into position.
34
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the door/drawer handle on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the handle is if it is damaged or missing.
All of the information in this handle replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this handle replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Door/Drawer Handle Replacement
3
Tools needed: Phillips-head screwdriver, pliers
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
If replace the oven door handle, fully open the door and rotate both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a Phillips-head screwdriver or a number two square driver to unthread the three screws on the bottom of the door assembly and the two screws in the upper corners.
11
With the screws unthreaded, lift out the inner door panel.
12
Now unthread the two mounting screws securing the door handle and bracket.
13
Install the new door handle by aligning it on the outer door.
14
Reposition the bracket, then thread and tighten the mounting screws.
15
Join the inner and outer door panels together.
16
Thread the five screws to secure.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
If you?re replacing the warming drawer handle, pull out the drawer and remove the rack.
20
Sharp
21
Next, use pliers to bend the slide rails outward to fully detach the drawer assembly ? this may require some effort.
22
Set the drawer upside down on a sturdy surface.
23
Use the Phillips-head screwdriver or the number two square drive bit to unthread the screws from the bottom of the front panel.
24
Turn the drawer assembly over and remove the top screws.
25
Detach the drawer from the front panel.
26
Sharp
27
Set the insulation and the inner panel aside.
28
You can now unthread the mounting screws to release the old drawer handle.
29
Align the new handle on the panel, reposition the support washers, then thread and tighten the mounting screws.
30
Replace the inner panel and the insulation.
31
Realign the drawer on the front panel and rethread the top screws.
32
Turn the drawer assembly over and rethread the bottom screws.
33
With both slide rails pulled out, align the slots in the drawer assembly with the tabs on the slide rails and snap the assembly into position.
34
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com