Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKohler Lawn Mower Dies? Voltage Regulator/Rectifier 4140310-S
Kohler Lawn Mower Dies? Voltage Regulator/Rectifier 4140310-S
Skill Level
Total Parts Cost
$141.74Estimated Savings
$112.5001:45
- Description
This video provides step-by-step instructions for replacing the voltage regulator/rectifier on single cylinder Kohler Command small engines, commonly found on riding lawn mowers, riding tractors, zero-turn radius mowers, and commercial walk-behind mowers. The most common reason for replacing the regulator/rectifier is when the battery keeps draining.
All of the information in this regulator/rectifier replacement video is applicable to the following brands: Kohler, Exmark, Toro, John Deere
Tools used: socket wrench
All of the information in this regulator/rectifier replacement video is applicable to the following brands: Kohler, Exmark, Toro, John Deere
Tools used: socket wrench
Step By Step Instructions
1
Before you begin this replacement, make sure the engine has cooled remove the wire and boot from the spark plug or plugs
2
Then disconnect the cables from the battery; black first, then red.
3
Note the orientation of the wires attached to the regulator/rectifier, then disconnect them.
4
Next, use a socket to remove the screws securing the old regulator/rectifier and pull it off.
5
Install the new regulator/rectifier by aligning it on the blower housing reattach the grounding wire if applicable to your model as you secure the screws.
6
Reconnect the wires.
7
You can now reconnect the battery cables red first, then black.
8
Finally, reattach the wire and boot to the spark plug or plugs.
Description
This video provides step-by-step instructions for replacing the voltage regulator/rectifier on single cylinder Kohler Command small engines, commonly found on riding lawn mowers, riding tractors, zero-turn radius mowers, and commercial walk-behind mowers. The most common reason for replacing the regulator/rectifier is when the battery keeps draining.
All of the information in this regulator/rectifier replacement video is applicable to the following brands: Kohler, Exmark, Toro, John Deere
Tools used: socket wrench
All of the information in this regulator/rectifier replacement video is applicable to the following brands: Kohler, Exmark, Toro, John Deere
Tools used: socket wrench
Step-By-Step Instructions
1
Before you begin this replacement, make sure the engine has cooled remove the wire and boot from the spark plug or plugs
2
Then disconnect the cables from the battery; black first, then red.
3
Note the orientation of the wires attached to the regulator/rectifier, then disconnect them.
4
Next, use a socket to remove the screws securing the old regulator/rectifier and pull it off.
5
Install the new regulator/rectifier by aligning it on the blower housing reattach the grounding wire if applicable to your model as you secure the screws.
6
Reconnect the wires.
7
You can now reconnect the battery cables red first, then black.
8
Finally, reattach the wire and boot to the spark plug or plugs.
Applicable Product Model
Parts Needed
Voltage Regulator
$141.74
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com