Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Electric Dryer Cycling Thermostat #8318268
Whirlpool/Kenmore Electric Dryer Cycling Thermostat #8318268
Skill Level
Total Parts Cost
$69.18Estimated Savings
$112.5001:11
- Description
This video provides step-by-step repair instructions for replacing the cycling thermostat on a Whirlpool/Kenmore electric dryer. The most common reason for replacing the cycling thermostat are when the dryer doesn’t heat, is too hot, takes too long, or won’t stop.
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Amana, Inglis
Tools needed: hex socket, flat head screwdriver, Phillips head screwdriver
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Amana, Inglis
Tools needed: hex socket, flat head screwdriver, Phillips head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the back panel.
3
Next, disconnect all four wires from the old cycling thermostat.
4
Remove the mounting screw and slide the thermostat out of the slot.
5
Install the new cycling thermostat by sliding one end into the slot and securing it with the mounting screw.
6
Reconnect the four wires replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the cycling thermostat on a Whirlpool/Kenmore electric dryer. The most common reason for replacing the cycling thermostat are when the dryer doesn’t heat, is too hot, takes too long, or won’t stop.
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Amana, Inglis
Tools needed: hex socket, flat head screwdriver, Phillips head screwdriver
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Amana, Inglis
Tools needed: hex socket, flat head screwdriver, Phillips head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the back panel.
3
Next, disconnect all four wires from the old cycling thermostat.
4
Remove the mounting screw and slide the thermostat out of the slot.
5
Install the new cycling thermostat by sliding one end into the slot and securing it with the mounting screw.
6
Reconnect the four wires replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Cycling Thermostat
$69.18
Total$0.00
Related Articles & Videos
01:12
Part Replacement
Dryer Not Heating? – Whirlpool/Kenmore Dryer Repair Part # 3392519
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com