Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Dryer Steam Nozzle Washer Replacement #W10044579 
Whirlpool Gas Dryer Steam Nozzle Washer Replacement #W10044579
Skill Level
Total Parts Cost
$6.07Estimated Savings
$112.5000:55
- Description
This video provides step-by-step repair instructions for replacing the steam nozzle washer on a Whirlpool gas dryer (model #WGD49STBW2). The most common reason for replacing the washer is if the nozzle will not stay secured in the rear of the drum.
This washer replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
This washer replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Whirlpool Gas Dryer - WGD49STBW2
2
Dryer Steam Nozzle Washer Replacement
3
Tools needed: 11/16th inch socket or wrench
4
Open the door and use an 11/16th inch socket or wrench to unthread the nut securing the nozzle to the rear bulkhead.
5
With the nut unthreaded, you can remove the old washer.
6
Install the new steam nozzle washer by aligning it over the nozzle.
7
Rethread and tighten the nut to secure.
Description
This video provides step-by-step repair instructions for replacing the steam nozzle washer on a Whirlpool gas dryer (model #WGD49STBW2). The most common reason for replacing the washer is if the nozzle will not stay secured in the rear of the drum.
This washer replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
This washer replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Whirlpool Gas Dryer - WGD49STBW2
2
Dryer Steam Nozzle Washer Replacement
3
Tools needed: 11/16th inch socket or wrench
4
Open the door and use an 11/16th inch socket or wrench to unthread the nut securing the nozzle to the rear bulkhead.
5
With the nut unthreaded, you can remove the old washer.
6
Install the new steam nozzle washer by aligning it over the nozzle.
7
Rethread and tighten the nut to secure.
Applicable Product Model
Parts Needed
Washer
$6.07
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com