Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Dryer Power Cord Replacement #W11222083 
Whirlpool Gas Dryer Power Cord Replacement #W11222083
Skill Level
Total Parts Cost
$69.94Estimated Savings
$112.5001:39
- Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool gas dryer (model #WGD49STBW2). The most common reason for replacing the cord is if the dryer will not turn on at all.
This cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
This cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Whirlpool Gas Dryer - WGD49STBW2
2
Gas Dryer Power Cord Replacement
3
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver
4
Shock Hazard
5
Make sure the old cord is unplugged.
6
Use a quarter-inch socket or nut driver to unthread the screw to release the power cord access panel.
7
Sharp
8
Detach the power cord strain relief from the frame and disconnect the two wires from the cord.
9
Use a 5/16th inch socket or nut driver to unthread the screw securing the grounding wire to fully remove the old cord.
10
Install the new power cord by first securing the grounding wire to the frame.
11
Connect the wires to the appropriate terminals on the new cord.
12
With the grounding wire facing up, secure the strain relief on the frame.
13
Replace the access panel and secure it with the screw.
14
With the repair completed, plug the new power cord in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool gas dryer (model #WGD49STBW2). The most common reason for replacing the cord is if the dryer will not turn on at all.
This cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
This cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Whirlpool Gas Dryer - WGD49STBW2
2
Gas Dryer Power Cord Replacement
3
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver
4
Shock Hazard
5
Make sure the old cord is unplugged.
6
Use a quarter-inch socket or nut driver to unthread the screw to release the power cord access panel.
7
Sharp
8
Detach the power cord strain relief from the frame and disconnect the two wires from the cord.
9
Use a 5/16th inch socket or nut driver to unthread the screw securing the grounding wire to fully remove the old cord.
10
Install the new power cord by first securing the grounding wire to the frame.
11
Connect the wires to the appropriate terminals on the new cord.
12
With the grounding wire facing up, secure the strain relief on the frame.
13
Replace the access panel and secure it with the screw.
14
With the repair completed, plug the new power cord in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Power Cord
$69.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com