Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCabrio/Oasis Top Load Washer Suspension Ball Kit #W10198919
Cabrio/Oasis Top Load Washer Suspension Ball Kit #W10198919
Skill Level
Total Parts Cost
$103.64Estimated Savings
$112.5002:06
- Description
This video provides step-by-step repair instructions for replacing the suspension ball kit on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the suspension balls is when replacing the suspension rods.
All of the information for this suspension ball kit replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag
Tools needed: putty knife
All of the information for this suspension ball kit replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag
Tools needed: putty knife
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to use tape to secure the washer lid.
3
Next, use a putty knife to release the retaining clips securing the main top.
4
The clips are located approximately six and a half inches in from each side of the washer.
5
Rotate the main top upward and support it.
6
Reach into the cabinet and pull one of the suspension rods upward.
7
This will allow you to remove the old suspension ball from the rod.
8
Clean the grease off of the suspension ball cup.
9
Install the new suspension ball by first inserting the new top bushing into the ball cup.
10
Lift the rod up through the bushing, then snap the new suspension ball onto the rod.
11
Repeat the process for the remaining three balls.
12
With the suspension balls fully installed, remove the support.
13
Rotate the main top down and snap it into place.
14
Remove the tape securing the lid.
15
You can now plug the appliance back in to make sure it's functioning properly.
Description
This video provides step-by-step repair instructions for replacing the suspension ball kit on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the suspension balls is when replacing the suspension rods.
All of the information for this suspension ball kit replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag
Tools needed: putty knife
All of the information for this suspension ball kit replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag
Tools needed: putty knife
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to use tape to secure the washer lid.
3
Next, use a putty knife to release the retaining clips securing the main top.
4
The clips are located approximately six and a half inches in from each side of the washer.
5
Rotate the main top upward and support it.
6
Reach into the cabinet and pull one of the suspension rods upward.
7
This will allow you to remove the old suspension ball from the rod.
8
Clean the grease off of the suspension ball cup.
9
Install the new suspension ball by first inserting the new top bushing into the ball cup.
10
Lift the rod up through the bushing, then snap the new suspension ball onto the rod.
11
Repeat the process for the remaining three balls.
12
With the suspension balls fully installed, remove the support.
13
Rotate the main top down and snap it into place.
14
Remove the tape securing the lid.
15
You can now plug the appliance back in to make sure it's functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com