DescriptionThis video provides step-by-step instructions for replacing the indicator light on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the light is if the bulb is not lighting.
All of the information in this light replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Indicator Light Replacement
3
You will need Phillips-head screwdriver or quarter-inch nut driver to complete this repair.
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Lift the appropriate indicator light off of the jewel.
12
Note the orientation of the wires connected to the old light?then disconnect them.
13
Install the new indicator light, by first connecting the wires to the terminals.
14
Align the light on the jewel and snap it into place.
15
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
16
Align the panel and replace the upper screws.
17
Realign the brace then thread the lower screws.
18
Restore power to the outlet or junction box.