Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Lower Inner Door Glass Replacement #WP9757706 
Kitchenaid Double Oven Electric Range Lower Inner Door Glass Replacement #WP9757706
Skill Level
Total Parts Cost
$92.94Estimated Savings
$112.5006:03
- Description
This video provides step-by-step instructions for replacing the lower inner door glass on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the glass is if it is damaged.
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Lower Inner Door Glass Replacement
3
You will need phillips-head screwdriver to complete this repair.
4
Shock
5
Be sure to shut off the power supply to the outlet or junction box.
6
Heavy
7
You will need to pull the range away from the wall, then lift up the front of the appliance and support it in the center.
8
Now unthread the two lower screws securing the door retaining brackets to the frame.
9
Open the door, and unthread the upper screws securing the brackets.
10
Rotate the hinge locks back
11
Loosen the brackets and use tape to help secure them to the door.
12
Heavy
13
Now partially close the door?then lift and pull the door toward you to remove.
14
After setting the door on a sturdy surface, remove the retaining brackets.
15
Use a phillips-head screwdriver to unthread the three screws on the bottom securing the inner and outer door assemblies.
16
Next, unthread the two upper corner screws.
17
Sharp
18
With the screws unthreaded, you can lift off the inner door assembly.
19
Set a towel under the inner assembly.
20
Unthread the mounting screws securing the left and right door hinges, and pull out the hinges.
21
Now unthread the two screws securing the inner door liner to the retainer.
22
Lift off the inner door liner and remove the appropriate sheet of glass.
23
Install the new inner door glass, by aligning it on the upper door retainer or the frame, depending on which sheet of glass you?re replacing.
24
If applicable, realign the frame and insulation.
25
Realign the inner door liner, and thread the two screws to secure.
26
Reposition both door hinges and secure them with the mounting screws.
27
Join the inner and outer door assemblies together.
28
Replace the two upper corner screws, and the three screws on the bottom.
29
With the edges facing outward, realign the two door retaining brackets past the notch in the hinge.
30
Use tape to hold them in place.
31
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
32
Reposition the retaining brackets and rotate the hinge locks forward.
33
Rethread the upper screws to secure the brackets.
34
Close the door, and thread the two lower screws to fully secure the retaining brackets.
35
Remove the support and lower the appliance.
36
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the lower inner door glass on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the glass is if it is damaged.
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Lower Inner Door Glass Replacement
3
You will need phillips-head screwdriver to complete this repair.
4
Shock
5
Be sure to shut off the power supply to the outlet or junction box.
6
Heavy
7
You will need to pull the range away from the wall, then lift up the front of the appliance and support it in the center.
8
Now unthread the two lower screws securing the door retaining brackets to the frame.
9
Open the door, and unthread the upper screws securing the brackets.
10
Rotate the hinge locks back
11
Loosen the brackets and use tape to help secure them to the door.
12
Heavy
13
Now partially close the door?then lift and pull the door toward you to remove.
14
After setting the door on a sturdy surface, remove the retaining brackets.
15
Use a phillips-head screwdriver to unthread the three screws on the bottom securing the inner and outer door assemblies.
16
Next, unthread the two upper corner screws.
17
Sharp
18
With the screws unthreaded, you can lift off the inner door assembly.
19
Set a towel under the inner assembly.
20
Unthread the mounting screws securing the left and right door hinges, and pull out the hinges.
21
Now unthread the two screws securing the inner door liner to the retainer.
22
Lift off the inner door liner and remove the appropriate sheet of glass.
23
Install the new inner door glass, by aligning it on the upper door retainer or the frame, depending on which sheet of glass you?re replacing.
24
If applicable, realign the frame and insulation.
25
Realign the inner door liner, and thread the two screws to secure.
26
Reposition both door hinges and secure them with the mounting screws.
27
Join the inner and outer door assemblies together.
28
Replace the two upper corner screws, and the three screws on the bottom.
29
With the edges facing outward, realign the two door retaining brackets past the notch in the hinge.
30
Use tape to hold them in place.
31
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
32
Reposition the retaining brackets and rotate the hinge locks forward.
33
Rethread the upper screws to secure the brackets.
34
Close the door, and thread the two lower screws to fully secure the retaining brackets.
35
Remove the support and lower the appliance.
36
Restore power to the outlet or junction box.
Applicable Product Model
Related Articles & Videos
06:02
Part Replacement
Kitchenaid Double Oven Gas Range Lower Inner Door Glass Replacement #WP9757706
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com