Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Warm Zone Surface Element Replacement #WP9762851 
Kitchenaid Double Oven Electric Range Warm Zone Surface Element Replacement #WP9762851
Skill Level
Total Parts Cost
$215.38Estimated Savings
$112.5002:38
- Description
This video provides step-by-step instructions for replacing the warm zone surface element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if it is not heating.
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Warm Zone Surface Element Replacement
3
You will need phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Open the upper oven door, and use a phillips-head screwdriver to unthread the two screws securing the main top.
7
Sharp
8
With the screws unthreaded, carefully lift off the top.
9
Detach the warm zone surface element retaining clips from the support panel.
10
Note the orientation of the wires connected to the element terminals and the high-limit thermostat then disconnect them.
11
Prepare the new warm zone surface element for installation, by transferring the spring clips from the old element bracket to the new one.
12
Connect the wires to the element terminals and the thermostat.
13
Insert the clips into the slots in the support panel and snap the new element into place.
14
Reinstall the main top by positioning the rear edge under the control panel support brackets.
15
Align the front edge then thread and tighten the two screws to secure.
16
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the warm zone surface element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if it is not heating.
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this glass replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Warm Zone Surface Element Replacement
3
You will need phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Open the upper oven door, and use a phillips-head screwdriver to unthread the two screws securing the main top.
7
Sharp
8
With the screws unthreaded, carefully lift off the top.
9
Detach the warm zone surface element retaining clips from the support panel.
10
Note the orientation of the wires connected to the element terminals and the high-limit thermostat then disconnect them.
11
Prepare the new warm zone surface element for installation, by transferring the spring clips from the old element bracket to the new one.
12
Connect the wires to the element terminals and the thermostat.
13
Insert the clips into the slots in the support panel and snap the new element into place.
14
Reinstall the main top by positioning the rear edge under the control panel support brackets.
15
Align the front edge then thread and tighten the two screws to secure.
16
Restore power to the outlet or junction box.
Applicable Product Model
Parts Needed
Radiant Surface Element
$215.38
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com