Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Terminal Block Replacement #WPW10245259 
Kitchenaid Double Oven Electric Range Terminal Block Replacement #WPW10245259
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5005:33
- Description
This video provides step-by-step instructions for replacing the terminal block on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the terminal block is if the range is not receiving power.
All of the information in this terminal block replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this terminal block replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Terminal Block Replacement
3
You will need phillips-head screwdriver or quarter-inch nut driver, and a 3/8th inch sock or nut driver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
You should also unplug the power cord.
8
Using a phillips-head screwdriver, unthread the two screws securing the terminal block cover.
9
Sharp
10
Pull the cover down and toward you to remove.
11
Use a 3/8th inch socket or nut driver to unthread the nuts securing the power cord wires.
12
Use a phillips-head screwdriver to unthread the screw securing the grounding wire.
13
Note the orientation of the wires then pull them free.
14
Next, unthread the nuts to release the main supply wires.
15
Use the phillips-head screwdriver to unthread the appropriate screws to fully remove the old terminal block.
16
You?re now ready to install the new terminal block.
17
Make sure the insulator is aligned behind the terminal block, then thread and tighten the screws to secure.
18
Align the main supply wires on the posts, then thread the nuts.
19
For three-wire power cords, secure the white or center neutral wire of the cord to the center terminal block post under a hex-nut.
20
Next, secure the remaining power cord wires to the outer terminal block posts using the hex-nuts.
21
Be sure to firmly tighten the nuts.
22
If you?re using a four-wire power cord, cut out the middle of the metal grounding strap.
23
Align the green grounding wire from the power cord on the ground link?then secure the wire and ground link to the back of the range with the screw.
24
As with the three-wire power cord, secure the white neutral wire to the middle terminal block post, and the red and black wires to the outer posts.
25
Again, firmly tighten the nuts.
26
Reposition the terminal block cover, and secure it with the screws.
27
Plug the power cord in.
28
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the terminal block on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the terminal block is if the range is not receiving power.
All of the information in this terminal block replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this terminal block replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Terminal Block Replacement
3
You will need phillips-head screwdriver or quarter-inch nut driver, and a 3/8th inch sock or nut driver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
You should also unplug the power cord.
8
Using a phillips-head screwdriver, unthread the two screws securing the terminal block cover.
9
Sharp
10
Pull the cover down and toward you to remove.
11
Use a 3/8th inch socket or nut driver to unthread the nuts securing the power cord wires.
12
Use a phillips-head screwdriver to unthread the screw securing the grounding wire.
13
Note the orientation of the wires then pull them free.
14
Next, unthread the nuts to release the main supply wires.
15
Use the phillips-head screwdriver to unthread the appropriate screws to fully remove the old terminal block.
16
You?re now ready to install the new terminal block.
17
Make sure the insulator is aligned behind the terminal block, then thread and tighten the screws to secure.
18
Align the main supply wires on the posts, then thread the nuts.
19
For three-wire power cords, secure the white or center neutral wire of the cord to the center terminal block post under a hex-nut.
20
Next, secure the remaining power cord wires to the outer terminal block posts using the hex-nuts.
21
Be sure to firmly tighten the nuts.
22
If you?re using a four-wire power cord, cut out the middle of the metal grounding strap.
23
Align the green grounding wire from the power cord on the ground link?then secure the wire and ground link to the back of the range with the screw.
24
As with the three-wire power cord, secure the white neutral wire to the middle terminal block post, and the red and black wires to the outer posts.
25
Again, firmly tighten the nuts.
26
Reposition the terminal block cover, and secure it with the screws.
27
Plug the power cord in.
28
Restore power to the outlet or junction box.
Applicable Product Model
Parts Needed
Terminal Block
$30.10
Total$0.00
Related Articles & Videos
04:13
Part Replacement
Kitchenaid Electric Slide-In Range Terminal Block Replacement #WPW10245259
08:29
Part Replacement
Whirlpool Electric Cooktop Terminal Block Replacement #WPW10245259
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com