Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Convection Element Replacement #W10271639 
Kitchenaid Double Oven Electric Range Convection Element Replacement #W10271639
Skill Level
Total Parts Cost
$212.75Estimated Savings
$112.5005:05
- Description
This video provides step-by-step instructions for replacing the convection element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if the convection function is not working properly.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Convection Element Replacement
3
You will need phillips-head screwdriver or a number two square drive bit to complete this repair.
4
Shock
5
SHUT OFF THE POWER SUPPLY TO THE OUTLET OR JUNCTION BOX.
6
Heavy
7
You will need to pull the range away from the wall, then lift up the front of the appliance and support it in the center.
8
Now unthread the two lower screws securing the door retaining brackets to the frame.
9
Open the door, and unthread the upper screws securing the door retaining brackets.
10
Rotate the hinge locks back
11
Loosen the brackets and use tape to help secure them to the door.
12
Heavy
13
Partially close the door?then lift and pull the door toward you to remove.
14
Remove the support and lower the range.
15
Remove the oven racks.
16
Use a phillips-head screwdriver to unthread the screws to release the convection fan baffle.
17
You can now unthread the two mounting screws securing the convection element.
18
Pull the element forward to access the wires?then depress the retaining tabs to disconnect the wires from the terminals ? make sure the wires don?t slip behind the rear panel.
19
Install the new convection element, by first connecting the wires to the terminals.
20
Position the element on the rear of the oven, then thread and tighten the mounting screws.
21
Reposition the baffle and replace the screws to hold it in place.
22
Replace the oven racks.
23
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
24
Reposition the retaining brackets and rotate the hinge locks forward.
25
Rethread the upper screws to secure the brackets.
26
Close the door, and thread the two lower screws to fully secure the retaining brackets.
27
Remove the support and lower the range.
28
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the convection element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if the convection function is not working properly.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Convection Element Replacement
3
You will need phillips-head screwdriver or a number two square drive bit to complete this repair.
4
Shock
5
SHUT OFF THE POWER SUPPLY TO THE OUTLET OR JUNCTION BOX.
6
Heavy
7
You will need to pull the range away from the wall, then lift up the front of the appliance and support it in the center.
8
Now unthread the two lower screws securing the door retaining brackets to the frame.
9
Open the door, and unthread the upper screws securing the door retaining brackets.
10
Rotate the hinge locks back
11
Loosen the brackets and use tape to help secure them to the door.
12
Heavy
13
Partially close the door?then lift and pull the door toward you to remove.
14
Remove the support and lower the range.
15
Remove the oven racks.
16
Use a phillips-head screwdriver to unthread the screws to release the convection fan baffle.
17
You can now unthread the two mounting screws securing the convection element.
18
Pull the element forward to access the wires?then depress the retaining tabs to disconnect the wires from the terminals ? make sure the wires don?t slip behind the rear panel.
19
Install the new convection element, by first connecting the wires to the terminals.
20
Position the element on the rear of the oven, then thread and tighten the mounting screws.
21
Reposition the baffle and replace the screws to hold it in place.
22
Replace the oven racks.
23
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
24
Reposition the retaining brackets and rotate the hinge locks forward.
25
Rethread the upper screws to secure the brackets.
26
Close the door, and thread the two lower screws to fully secure the retaining brackets.
27
Remove the support and lower the range.
28
Restore power to the outlet or junction box.
Applicable Product Model
Parts Needed
Convection Element
$212.75
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com