Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range User Interface Assembly Replacement #W10692155 
Kitchenaid Double Oven Electric Range User Interface Assembly Replacement #W10692155
Skill Level
Total Parts Cost
$248.02Estimated Savings
$112.5004:56
- Description
This video provides step-by-step instructions for replacing the user interface assembly on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the assembly is if it is damaged or missing.
All of the information in this knob replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this knob replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - user interface assembly replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Remove the four control knobs.
12
Unthread the screws securing the control knob bezels and surface element switches.
13
Remove all of the switches from the control panel.
14
Lift the two indicator lights off of the jewels.
15
Disconnect the ribbon connecter from the control board.
16
Now unthread the four mounting screws to release the board from the user interface assembly.
17
You can now unthread the screws securing the interface assembly to the control panel ? make sure the loose screws don?t drop down behind the lower rear access panel.
18
Detach the old assembly.
19
Install the new user interface assembly, by aligning the upper tabs with the notches at the top of the control panel.
20
Hold the assembly in place as you thread and tighten the mounting screws.
21
Realign the control board and secure it with the screws.
22
Connect the new ribbon connecter to the board.
23
Align the indicator lights on the jewels and snap them into place.
24
Install the switches by first inserting a screw through the top hole of each control knob bezel and align each bezel on the control panel.
25
Position the switch?then thread and tighten the top screw.
26
Thread and tighten the bottom screw.
27
Repeat to install all of the switches.
28
Replace the control knobs on the switch stems.
29
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
30
Align the panel and replace the upper screws.
31
Realign the brace then thread the lower screws.
32
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the user interface assembly on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the assembly is if it is damaged or missing.
All of the information in this knob replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this knob replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - user interface assembly replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Remove the four control knobs.
12
Unthread the screws securing the control knob bezels and surface element switches.
13
Remove all of the switches from the control panel.
14
Lift the two indicator lights off of the jewels.
15
Disconnect the ribbon connecter from the control board.
16
Now unthread the four mounting screws to release the board from the user interface assembly.
17
You can now unthread the screws securing the interface assembly to the control panel ? make sure the loose screws don?t drop down behind the lower rear access panel.
18
Detach the old assembly.
19
Install the new user interface assembly, by aligning the upper tabs with the notches at the top of the control panel.
20
Hold the assembly in place as you thread and tighten the mounting screws.
21
Realign the control board and secure it with the screws.
22
Connect the new ribbon connecter to the board.
23
Align the indicator lights on the jewels and snap them into place.
24
Install the switches by first inserting a screw through the top hole of each control knob bezel and align each bezel on the control panel.
25
Position the switch?then thread and tighten the top screw.
26
Thread and tighten the bottom screw.
27
Repeat to install all of the switches.
28
Replace the control knobs on the switch stems.
29
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
30
Align the panel and replace the upper screws.
31
Realign the brace then thread the lower screws.
32
Restore power to the outlet or junction box.
Applicable Product Model
Parts Needed
Touchpad and Control Panel
$248.02
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com