DescriptionThis video provides step-by-step instructions for replacing the upper outer door assembly on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the door is if it is damaged.
All of the information in this door replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Upper Outer Door Assembly replacement
3
You will need a phillips-head screwdriver to complete this repair.
5
Shut off the power supply to the outlet or junction box.
6
Fully open the oven door, and rotate both door hinge locks back.
8
Partially close the door?then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a phillips-head screwdriver to unthread the three screws on the bottom securing the inner and outer door assemblies.
11
Next, unthread the two upper corner screws.
13
With the screws unthreaded, you can lift off the inner door assembly and set it aside.
14
Now unthread the two mounting screws securing the brackets and handle.
15
Set the brackets aside and remove the handle.
16
You?re now ready to prepare the new outer door assembly for installation.
17
Align the handle, position the two brackets, and thread the screws to secure.
18
Join the inner and outer door assemblies together.
19
Replace the two upper corner screws, and the three screws on the bottom.
20
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
21
Lower the door to its fully open position, then rotate the hinge locks forward.
22
Restore power to the outlet or junction box.