Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Convection Fan Motor Replacement #W10794420 
Kitchenaid Double Oven Electric Range Convection Fan Motor Replacement #W10794420
Skill Level
Total Parts Cost
$139.51Estimated Savings
$112.5007:38
- Description
This video provides step-by-step instructions for replacing the convection fan motor on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the motor is if the convection function is not working.
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Convection Fan Motor replacement
3
You will need a philips-head screwdriver, a quarter-inch nut driver, and a number two square drive bit to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a nut quarter-inch nut driver to unthread the two screws to release the upper rear access panel brace.
8
Next, unthread all of the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out to remove.
11
Now lift up the front of the appliance and support it in the center.
12
Unthread the two lower screws securing the door retaining brackets to the frame.
13
Open the door, and unthread the upper screws securing the door retaining brackets.
14
Rotate the hinge locks back
15
Loosen the brackets and use tape to help secure them to the door.
16
Heavy
17
Partially close the door?then lift and pull the door toward you to remove.
18
Remove the support and lower the range.
19
Remove the oven racks.
20
Use a phillips-head screwdriver to unthread the screws to release the convection fan baffle.
21
Use a half-inch wrench to unthread the convection blade nut clockwise to remove.
22
Sharp
23
Pull off the fan blade.
24
Now use a number two square drive bit to unthread the three mounting screws securing the fan motor.
25
Returning to the rear of the appliance, disconnect the wire connecter and you can fully remove the old fan motor.
26
Prepare the new convection fan motor for installation, by transferring the plate and insulation from the old motor to the new one.
27
Now connect the wire connecter and position the new motor on the rear panel.
28
Have an assistant hold it in place as you thread the mounting screws to secure.
29
Align the fan blade then thread the nut counter-clockwise and tighten.
30
Reposition the baffle and replace the screws to hold it in place.
31
Replace the oven racks.
32
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
33
Reposition the retaining brackets and rotate the hinge locks forward.
34
Rethread the upper screws to secure the brackets.
35
Close the door, and thread the two lower screws to fully secure the retaining brackets.
36
Remove the support and lower the appliance.
37
Replace the support cover if necessary, then reposition the rear access panel.
38
Thread and tighten the screws to secure.
39
Reposition the upper rear access brace and thread the screws to hold it in place.
40
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the convection fan motor on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the motor is if the convection function is not working.
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Convection Fan Motor replacement
3
You will need a philips-head screwdriver, a quarter-inch nut driver, and a number two square drive bit to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a nut quarter-inch nut driver to unthread the two screws to release the upper rear access panel brace.
8
Next, unthread all of the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out to remove.
11
Now lift up the front of the appliance and support it in the center.
12
Unthread the two lower screws securing the door retaining brackets to the frame.
13
Open the door, and unthread the upper screws securing the door retaining brackets.
14
Rotate the hinge locks back
15
Loosen the brackets and use tape to help secure them to the door.
16
Heavy
17
Partially close the door?then lift and pull the door toward you to remove.
18
Remove the support and lower the range.
19
Remove the oven racks.
20
Use a phillips-head screwdriver to unthread the screws to release the convection fan baffle.
21
Use a half-inch wrench to unthread the convection blade nut clockwise to remove.
22
Sharp
23
Pull off the fan blade.
24
Now use a number two square drive bit to unthread the three mounting screws securing the fan motor.
25
Returning to the rear of the appliance, disconnect the wire connecter and you can fully remove the old fan motor.
26
Prepare the new convection fan motor for installation, by transferring the plate and insulation from the old motor to the new one.
27
Now connect the wire connecter and position the new motor on the rear panel.
28
Have an assistant hold it in place as you thread the mounting screws to secure.
29
Align the fan blade then thread the nut counter-clockwise and tighten.
30
Reposition the baffle and replace the screws to hold it in place.
31
Replace the oven racks.
32
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
33
Reposition the retaining brackets and rotate the hinge locks forward.
34
Rethread the upper screws to secure the brackets.
35
Close the door, and thread the two lower screws to fully secure the retaining brackets.
36
Remove the support and lower the appliance.
37
Replace the support cover if necessary, then reposition the rear access panel.
38
Thread and tighten the screws to secure.
39
Reposition the upper rear access brace and thread the screws to hold it in place.
40
Restore power to the outlet or junction box.
Applicable Product Model
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com