DescriptionThis video provides step-by-step instructions for replacing the right front surface element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if it is not heating.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Right Front Surface Element replacement
4
Shut off the power supply to the outlet or junction box.
5
Open the upper oven door, and use a phillips-head screwdriver to unthread the two screws securing the main top.
7
With the screws unthreaded, carefully lift off the top.
8
Detach the surface element retaining clips from the support panel.
9
Note the orientation of the wires then disconnect them from the terminals.
10
Prepare the new surface element for installation, by transferring the spring clips from the old element to the new one.
11
Use the numbers engraved on the base to position the clips in the proper locations.
12
Connect the wires to the appropriate terminals.
13
Insert the clips into the slots in the support panel and snap the new element into place.
14
Reinstall the main top by positioning the rear edge under the control panel support brackets.
15
Align the front edge then thread and tighten the two screws to secure.
16
Restore power to the outlet or junction box.