DescriptionThis video provides step-by-step instructions for replacing the right upper door hinge on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the hinge is if the upper door will not open or close properly.
All of the information in this hinge replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Right Upper Door Hinge replacement
3
You will need a phillips-head screwdriver to complete this repair.
5
Shut off the power supply to the outlet or junction box.
6
Fully open the oven door, and rotate both door hinge locks back.
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a sturdy surface.
10
Use a phillips-head screwdriver to unthread the three screws on the bottom securing the inner and outer door assemblies.
11
Next, unthread the two upper corner screws.
13
With the screws unthreaded, you can lift off the inner door assembly.
14
You can now unthread the two mounting screws securing the hinge.
15
With the screws unthreaded, pull the old hinge free.
16
Install the new door hinge, by aligning it in the inner door liner, then secure it with the mounting screws.
17
Join the inner and outer door assemblies together.
18
Replace the two upper corner screws, and the three screws on the bottom.
19
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
20
Lower the door to its fully open position, then rotate the hinge locks forward.
21
Restore power to the outlet or junction box.