Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Control Board Replacement #WPW10778305 
Kitchenaid Double Oven Electric Range Control Board Replacement #WPW10778305
Skill Level
Total Parts Cost
$257.96Estimated Savings
$112.5003:24
- Description
This video provides step-by-step instructions for replacing the control board on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the board is if the range will not work at all.
All of the information in this board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Control Board replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Next, disconnect the ribbon connecter from the board.
12
Note the orientation of the wire connecters connected to the control board, then disconnect them.
13
Unthread the four screws securing the board to the control panel supports and remove the old board.
14
Install the new control board, by aligning it on the supports, then thread and tighten the mounting screws.
15
Connect the wire connecters to the appropriate terminals on the new board.
16
Connect the ribbon connecter as well.
17
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
18
Align the panel and replace the upper screws.
19
Realign the brace then thread the lower screws.
20
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the control board on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the board is if the range will not work at all.
All of the information in this board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Control Board replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Next, disconnect the ribbon connecter from the board.
12
Note the orientation of the wire connecters connected to the control board, then disconnect them.
13
Unthread the four screws securing the board to the control panel supports and remove the old board.
14
Install the new control board, by aligning it on the supports, then thread and tighten the mounting screws.
15
Connect the wire connecters to the appropriate terminals on the new board.
16
Connect the ribbon connecter as well.
17
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
18
Align the panel and replace the upper screws.
19
Realign the brace then thread the lower screws.
20
Restore power to the outlet or junction box.
Applicable Product Model
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com