Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCabrio/Oasis Washer Basket Drive Hub Replacement #280145
Cabrio/Oasis Washer Basket Drive Hub Replacement #280145
Skill Level
Total Parts Cost
$35.94Estimated Savings
$112.5002:22
- Description
This video provides step-by-step repair instructions for replacing the basket drive hub kit on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the basket drive hub is when the washer won’t spin.
All of the information for this basket drive hub kit replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore
Tools needed: socket wrench, flathead screwdriver, screwdriver
All of the information for this basket drive hub kit replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore
Tools needed: socket wrench, flathead screwdriver, screwdriver
Step By Step Instructions
1
To replace your washer's basket drive hub, you will first need to remove the agitator or the washing Peller, depending on your model.
2
If your washer uses an agitator, first remove the fabric softener dispenser and lint cap, if applicable.
3
Then, use a 7/16 inch socket with a 12 inch extension to loosen the mounting bolt.
4
With the bolt loosened, pull the agitator up and out.
5
If your model uses a wash plate, use a small flat-head screwdriver to pry off the impeller cap.
6
Now, use the 7/16 inch socket to remove the bolt securing the impeller and lift the impeller out.
7
Your next step is to remove the screws securing the driven hub.
8
Pull the hub off the drive shaft.
9
Along with the driver hub, you're now ready to install the new basket drive hub kit.
10
Position the new driver hub by sliding it onto the drive shaft.
11
Since the kit includes two different driven hubs, choose the one applicable to your model and slide it over the driver hub.
12
Secure the hub with the screws.
13
If applicable to your model, replace the agitator onto the drive shaft and secure the mounting bolt.
14
Replace the lint cap if necessary and the fabric softener dispenser.
15
If your model uses a wash blade, slide the impeller onto the drive shaft, secure it with the bolt, and replace the impeller cap.
16
With the new basket drive hub installed, make sure all tub components are functioning properly during the wash cycle.
Description
This video provides step-by-step repair instructions for replacing the basket drive hub kit on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the basket drive hub is when the washer won’t spin.
All of the information for this basket drive hub kit replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore
Tools needed: socket wrench, flathead screwdriver, screwdriver
All of the information for this basket drive hub kit replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore
Tools needed: socket wrench, flathead screwdriver, screwdriver
Step-By-Step Instructions
1
To replace your washer's basket drive hub, you will first need to remove the agitator or the washing Peller, depending on your model.
2
If your washer uses an agitator, first remove the fabric softener dispenser and lint cap, if applicable.
3
Then, use a 7/16 inch socket with a 12 inch extension to loosen the mounting bolt.
4
With the bolt loosened, pull the agitator up and out.
5
If your model uses a wash plate, use a small flat-head screwdriver to pry off the impeller cap.
6
Now, use the 7/16 inch socket to remove the bolt securing the impeller and lift the impeller out.
7
Your next step is to remove the screws securing the driven hub.
8
Pull the hub off the drive shaft.
9
Along with the driver hub, you're now ready to install the new basket drive hub kit.
10
Position the new driver hub by sliding it onto the drive shaft.
11
Since the kit includes two different driven hubs, choose the one applicable to your model and slide it over the driver hub.
12
Secure the hub with the screws.
13
If applicable to your model, replace the agitator onto the drive shaft and secure the mounting bolt.
14
Replace the lint cap if necessary and the fabric softener dispenser.
15
If your model uses a wash blade, slide the impeller onto the drive shaft, secure it with the bolt, and replace the impeller cap.
16
With the new basket drive hub installed, make sure all tub components are functioning properly during the wash cycle.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com