Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCabrio/Oasis Top Load Washer Wash Plate #W10286241
Cabrio/Oasis Top Load Washer Wash Plate #W10286241
Skill Level
Total Parts Cost
$119.86Estimated Savings
$112.5000:55
- Description
This video provides step-by-step repair instructions for replacing the wash plate on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the wash plate is when the wash is not spinning or agitating.
All of the information for this wash plate replacement video is applicable to the following brands:
Whirlpool
Tools needed: socket wrench, flathead screwdriver
All of the information for this wash plate replacement video is applicable to the following brands:
Whirlpool
Tools needed: socket wrench, flathead screwdriver
Step By Step Instructions
1
To replace your washing machine's wash plate, first use a small flat-head screwdriver to pry off the impeller cap.
2
Now, use a 7/16 inch socket to remove the bolt securing the impeller and lift the old impeller out.
3
Install the new impeller by sliding it onto the drive shaft, secure it with the bolt, and replace the impeller cap.
4
With the new wash plate installed, make sure all tub components are functioning properly during the wash cycle.
Description
This video provides step-by-step repair instructions for replacing the wash plate on a Cabrio/Oasis top-loading washing machine. The most common reason for replacing the wash plate is when the wash is not spinning or agitating.
All of the information for this wash plate replacement video is applicable to the following brands:
Whirlpool
Tools needed: socket wrench, flathead screwdriver
All of the information for this wash plate replacement video is applicable to the following brands:
Whirlpool
Tools needed: socket wrench, flathead screwdriver
Step-By-Step Instructions
1
To replace your washing machine's wash plate, first use a small flat-head screwdriver to pry off the impeller cap.
2
Now, use a 7/16 inch socket to remove the bolt securing the impeller and lift the old impeller out.
3
Install the new impeller by sliding it onto the drive shaft, secure it with the bolt, and replace the impeller cap.
4
With the new wash plate installed, make sure all tub components are functioning properly during the wash cycle.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com