Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG/Kenmore Front Load Washer Vent Bellows #4738ER2002A
LG/Kenmore Front Load Washer Vent Bellows #4738ER2002A
Skill Level
Total Parts Cost
$47.40Estimated Savings
$112.5001:55
- Description
This video provides step-by-step instructions for replacing the vent bellows (hose) on Kenmore front loading washing machines with model prefix 796 and LG front loading washing machines. The most common reason for replacing the vent bellows is if they are torn, worn, or damaged.
All of the information in this bellows replacement video is applicable to the following brands: LG, Kenmore
Tools used: screwdriver, wrench
All of the information in this bellows replacement video is applicable to the following brands: LG, Kenmore
Tools used: screwdriver, wrench
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the main top.
3
Now slide the main top back approximately one inch then lift up to remove.
4
Next, use a screwdriver to loosen both screw clamps securing the fill bellows to the dispenser assembly and the tub.
5
Pull the bellows free and set them aside.
6
Prepare the new fill bellows for installation by transferring both screw clamps from the old bellows to the new one.
7
Attach the new bellows to the tub port and to the dispenser port.
8
Tighten both screw clamps.
9
With the new fill bellows installed, align the main top and slide it forward into place.
10
Secure the screws at the rear.
11
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the vent bellows (hose) on Kenmore front loading washing machines with model prefix 796 and LG front loading washing machines. The most common reason for replacing the vent bellows is if they are torn, worn, or damaged.
All of the information in this bellows replacement video is applicable to the following brands: LG, Kenmore
Tools used: screwdriver, wrench
All of the information in this bellows replacement video is applicable to the following brands: LG, Kenmore
Tools used: screwdriver, wrench
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the main top.
3
Now slide the main top back approximately one inch then lift up to remove.
4
Next, use a screwdriver to loosen both screw clamps securing the fill bellows to the dispenser assembly and the tub.
5
Pull the bellows free and set them aside.
6
Prepare the new fill bellows for installation by transferring both screw clamps from the old bellows to the new one.
7
Attach the new bellows to the tub port and to the dispenser port.
8
Tighten both screw clamps.
9
With the new fill bellows installed, align the main top and slide it forward into place.
10
Secure the screws at the rear.
11
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com