Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Sidekick Freezer Condenser Fan Blade Replacement WPW10139483 
Whirlpool Sidekick Freezer Condenser Fan Blade Replacement WPW10139483
Skill Level
Total Parts Cost
$50.56Estimated Savings
$112.5003:11
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Sidekick freezer (Model WSZ57L18DM00). The most common reason for replacing this part is if it is damaged and the freezer is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Condenser Fan Blade Replacement
3
Tools needed: Phillips-head screwdriver, a quarter-inch socket or wrench
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the freezer away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the freezer away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
If still intact, slide the old condenser fan blade off of the motor shaft.
13
Install the new condenser fan blade by sliding it onto the motor shaft until it is fully seated.
14
Reposition the access panel and rethread the screws.
15
If applicable, make sure to secure the strain relief clamp for the water supply tubing with the appropriate rear panel screw.
16
Once the freezer has been moved back into place?
17
Rotate the brake feet clockwise until both are in contact with the floor.
18
Snap the base grille into place.
19
Rethread the screws to secure the base grille.
20
Plug the power cord back in and your freezer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Sidekick freezer (Model WSZ57L18DM00). The most common reason for replacing this part is if it is damaged and the freezer is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Condenser Fan Blade Replacement
3
Tools needed: Phillips-head screwdriver, a quarter-inch socket or wrench
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the freezer away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the freezer away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
If still intact, slide the old condenser fan blade off of the motor shaft.
13
Install the new condenser fan blade by sliding it onto the motor shaft until it is fully seated.
14
Reposition the access panel and rethread the screws.
15
If applicable, make sure to secure the strain relief clamp for the water supply tubing with the appropriate rear panel screw.
16
Once the freezer has been moved back into place?
17
Rotate the brake feet clockwise until both are in contact with the floor.
18
Snap the base grille into place.
19
Rethread the screws to secure the base grille.
20
Plug the power cord back in and your freezer should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$50.56
Total$0.00
Related Articles & Videos
02:56
Part Replacement
Whirlpool Sidekick Refrigerator Condenser Fan Blade Replacement WPW10139483
01:50
Part Replacement
Whirlpool Sidekick Freezer Control Assembly Replacement W10812029
03:03
Part Replacement
Whirlpool Sidekick Freezer Evaporator Thermistor Replacement WPW10383615
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com