Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Sidekick Freezer Drain Tube Replacement W10717194 
Whirlpool Sidekick Freezer Drain Tube Replacement W10717194
Skill Level
Total Parts Cost
$35.94Estimated Savings
$112.5003:48
- Description
This video provides step-by-step repair instructions for replacing the drain tube on a Whirlpool Sidekick freezer (Model WSZ57L18DM00). The most common reason for replacing this part is if the freezer is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Drain Tube Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or wrench, flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the freezer away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the freezer away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
To access the drain tube mounting pin, you?ll need to remove the condenser fan blade from the motor shaft.
13
You can now use a flat-head screwdriver to pry out the drain tube mounting pin.
14
Sharp
15
Pull the front of the old drain tube down to remove.
16
Prepare the new drain tube for installation by transferring the mounting pin from the old tube to the new one.
17
Now position the larger end of the tube over the grommet.
18
Align the mounting pin and push it into place.
19
Slide the condenser fan blade back onto the motor shaft.
20
Reposition the access panel and rethread the screws.
21
If applicable, make sure to secure the strain relief clamp for the water supply tubing with the appropriate rear panel screw.
22
Once the freezer has been moved back into place?
23
Rotate the brake feet clockwise until both are in contact with the floor.
24
Snap the base grille into place.
25
Rethread the screws to secure the base grille.
26
Plug the power cord back in and your freezer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain tube on a Whirlpool Sidekick freezer (Model WSZ57L18DM00). The most common reason for replacing this part is if the freezer is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Drain Tube Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or wrench, flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
You will need to pull the freezer away from the wall so you can access the rear of the appliance.
7
To do this, use a Phillips-head screwdriver to unthread the screws securing the base grille.
8
Pull the base grille forward to remove.
9
Use a quarter-inch socket or wrench to rotate the brake feet counter-clockwise to raise them.
10
You can now roll the freezer away from the wall.
11
Use the quarter-inch socket or a nut driver to unthread the screws to release the rear access panel.
12
To access the drain tube mounting pin, you?ll need to remove the condenser fan blade from the motor shaft.
13
You can now use a flat-head screwdriver to pry out the drain tube mounting pin.
14
Sharp
15
Pull the front of the old drain tube down to remove.
16
Prepare the new drain tube for installation by transferring the mounting pin from the old tube to the new one.
17
Now position the larger end of the tube over the grommet.
18
Align the mounting pin and push it into place.
19
Slide the condenser fan blade back onto the motor shaft.
20
Reposition the access panel and rethread the screws.
21
If applicable, make sure to secure the strain relief clamp for the water supply tubing with the appropriate rear panel screw.
22
Once the freezer has been moved back into place?
23
Rotate the brake feet clockwise until both are in contact with the floor.
24
Snap the base grille into place.
25
Rethread the screws to secure the base grille.
26
Plug the power cord back in and your freezer should be ready for use.
Applicable Product Model
Parts Needed
Drain Hose
$35.94
Total$0.00
Related Articles & Videos
01:50
Part Replacement
Whirlpool Sidekick Freezer Control Assembly Replacement W10812029
03:03
Part Replacement
Whirlpool Sidekick Freezer Evaporator Thermistor Replacement WPW10383615
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com