Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Front-Load Washer Replace Pressure Switch #6601ER1006G
LG Front-Load Washer Replace Pressure Switch #6601ER1006G
Skill Level
Total Parts Cost
$70.67Estimated Savings
$112.5001:45
- Description
This video provides step-by-step repair instructions for replacing the pressure switch on an LG front-loading washing machine. The most common reasons for replacing the pressure switch are when the washer is overflowing or is not filling properly.
All of the information for this pressure switch replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: screwdriver
All of the information for this pressure switch replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the main top.
3
Now, slide the main top back approximately one inch, then lift up to remove.
4
Next, disconnect the wire harness from the old pressure switch.
5
Now, remove the mounting screw and lift the switch up and out.
6
Detach the tube and set the old switch aside.
7
Install the new pressure switch by first attaching the tube.
8
Now, position the switch on the control board cover and secure it with the mounting screw.
9
Connect the wire harness with the new switch installed.
10
Align the main top and slide it forward into place.
11
Secure the screws at the rear.
12
You're now ready to plug the appliance back in to make sure it's functioning properly.
Description
This video provides step-by-step repair instructions for replacing the pressure switch on an LG front-loading washing machine. The most common reasons for replacing the pressure switch are when the washer is overflowing or is not filling properly.
All of the information for this pressure switch replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: screwdriver
All of the information for this pressure switch replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the main top.
3
Now, slide the main top back approximately one inch, then lift up to remove.
4
Next, disconnect the wire harness from the old pressure switch.
5
Now, remove the mounting screw and lift the switch up and out.
6
Detach the tube and set the old switch aside.
7
Install the new pressure switch by first attaching the tube.
8
Now, position the switch on the control board cover and secure it with the mounting screw.
9
Connect the wire harness with the new switch installed.
10
Align the main top and slide it forward into place.
11
Secure the screws at the rear.
12
You're now ready to plug the appliance back in to make sure it's functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com