Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Scraper Blade Replacement #117-7717
Toro Snowblower Scraper Blade Replacement #117-7717
Skill Level
Total Parts Cost
$22.35Estimated Savings
$112.5000:56
- Description
This video provides step-by-step instructions for replacing the scraper blade (scraper bar) on Toro snowblowers. The most common reason for replacing the scraper blade is if it is worn.
All of the information in this scraper bar replacement video is applicable to the following brands: Toro
Tools used: nutdriver
All of the information in this scraper bar replacement video is applicable to the following brands: Toro
Tools used: nutdriver
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper bar, your first step is to tip the snowblower back so it rests on its handle.
3
Next, remove the mounting screws securing the scraper bar and slide the old bar off.
4
Install the new scraper bar by sliding it into position on the auger housing and securing the screws.
5
With the new scraper bar installed, you can now tip the snowblower back to its upright position and return the start key to the ignition.
Description
This video provides step-by-step instructions for replacing the scraper blade (scraper bar) on Toro snowblowers. The most common reason for replacing the scraper blade is if it is worn.
All of the information in this scraper bar replacement video is applicable to the following brands: Toro
Tools used: nutdriver
All of the information in this scraper bar replacement video is applicable to the following brands: Toro
Tools used: nutdriver
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper bar, your first step is to tip the snowblower back so it rests on its handle.
3
Next, remove the mounting screws securing the scraper bar and slide the old bar off.
4
Install the new scraper bar by sliding it into position on the auger housing and securing the screws.
5
With the new scraper bar installed, you can now tip the snowblower back to its upright position and return the start key to the ignition.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com