Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Evaporator Fan Motor Replacement WP2315539 
Whirlpool Matrix Refrigerator Evaporator Fan Motor Replacement WP2315539
Skill Level
Total Parts Cost
$55.29Estimated Savings
$112.5006:40
- Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Evaporator Fan Motor Replacement
3
Tools needed: quarter-inch socket or nut driver, Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
Open the freezer door and remove the ice bucket.
7
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
8
Loosen the two upper screws.
9
With the screws loosened, you can lift the ice maker off of the screws.
10
Lift the tab to disconnect the wire harness to fully remove the ice maker.
11
Slide out the glass shelf.
12
Fully unthread the upper ice maker mounting screws.
13
Using a Phillips-head screwdriver, unthread the screw to release the ice maker harness cover.
14
Slide the fill tube extension off of the fill tube.
15
Detach all of the screw-hole plugs and then use the quarter-inch socket or nut driver to unthread the screws securing the evaporator cover.
16
Sharp
17
Pull the evaporator cover forward from the top.
18
Push the ice maker wire harness through the slot and you can fully remove the evaporator cover.
19
Remove the insulator block.
20
Pull off the evaporator fan blade.
21
Use a towel to cover the evaporator coils to prevent the screws from dropping into the evaporator.
22
Now unthread the two mounting screws securing the evaporator fan motor bracket to the liner.
23
Detach the rear motor support.
24
Pull the old motor free of the bracket anc detach the grounding wire and disconnect the wire connecter.
25
Prepare the new evaporator fan motor for installation by positioning the two motor mounts.
26
Now connect the wire connecter and attach the grounding wire.
27
Position the motor on the bracket and snap the rear support into place.
28
Reposition the assembly on the liner and rethread the mounting screws.
29
Slide the fan blade onto the motor shaft until it is fully seated.
30
Reposition the insulator block.
31
Use string to help feed the ice maker wire harness through the slot in the evaporator cover as you fully position the cover ? this will require some effort.
32
Rethread all of the screws to secure the cover.
33
Snap in the screw-hole plugs.
34
Realign the wire harness cover and thread the screw to secure.
35
Slide the fill tube extension over the fill tube.
36
Partially thread the upper ice maker mounting screws.
37
Replace the glass shelf.
38
Reinstall the ice maker by first connecting the wire harness.
39
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
40
Tighten the screws.
41
Thread and tighten the lower screw.
42
Replace the ice bucket.
43
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Evaporator Fan Motor Replacement
3
Tools needed: quarter-inch socket or nut driver, Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord.
6
Open the freezer door and remove the ice bucket.
7
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
8
Loosen the two upper screws.
9
With the screws loosened, you can lift the ice maker off of the screws.
10
Lift the tab to disconnect the wire harness to fully remove the ice maker.
11
Slide out the glass shelf.
12
Fully unthread the upper ice maker mounting screws.
13
Using a Phillips-head screwdriver, unthread the screw to release the ice maker harness cover.
14
Slide the fill tube extension off of the fill tube.
15
Detach all of the screw-hole plugs and then use the quarter-inch socket or nut driver to unthread the screws securing the evaporator cover.
16
Sharp
17
Pull the evaporator cover forward from the top.
18
Push the ice maker wire harness through the slot and you can fully remove the evaporator cover.
19
Remove the insulator block.
20
Pull off the evaporator fan blade.
21
Use a towel to cover the evaporator coils to prevent the screws from dropping into the evaporator.
22
Now unthread the two mounting screws securing the evaporator fan motor bracket to the liner.
23
Detach the rear motor support.
24
Pull the old motor free of the bracket anc detach the grounding wire and disconnect the wire connecter.
25
Prepare the new evaporator fan motor for installation by positioning the two motor mounts.
26
Now connect the wire connecter and attach the grounding wire.
27
Position the motor on the bracket and snap the rear support into place.
28
Reposition the assembly on the liner and rethread the mounting screws.
29
Slide the fan blade onto the motor shaft until it is fully seated.
30
Reposition the insulator block.
31
Use string to help feed the ice maker wire harness through the slot in the evaporator cover as you fully position the cover ? this will require some effort.
32
Rethread all of the screws to secure the cover.
33
Snap in the screw-hole plugs.
34
Realign the wire harness cover and thread the screw to secure.
35
Slide the fill tube extension over the fill tube.
36
Partially thread the upper ice maker mounting screws.
37
Replace the glass shelf.
38
Reinstall the ice maker by first connecting the wire harness.
39
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
40
Tighten the screws.
41
Thread and tighten the lower screw.
42
Replace the ice bucket.
43
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Evaporator Fan Motor
$55.29
Recommended Tools and Accessories
Evaporator Fan Motor
$146.80
Total$0.00
Related Articles & Videos
04:55
How This Part Works
Refrigerator Evaporator Fan Motor - How it Works & Installation Tips
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com