Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAriens Snowblower Scraper Blade Replacement #04145959
Ariens Snowblower Scraper Blade Replacement #04145959
Skill Level
Total Parts Cost
$32.94Estimated Savings
$112.5001:37
- Description
This video provides step-by-step instructions for replacing the scraper blade on Ariens snowblowers. The most common reason for replacing the scraper blade is if it is worn.
All of the information in this scraper blade replacement video is applicable to the following brands: Ariens
Tools used: socket wrench
All of the information in this scraper blade replacement video is applicable to the following brands: Ariens
Tools used: socket wrench
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the engine.
2
To replace the scraper blade, your first step is to carefully tip the snowblower back so it rests on its handle bars.
3
Next, use a 9/16th inch socket to remove the nuts and washers securing the rear slide shoe mounting bolts on both sides of the blower housing and pull out the bolts.
4
Now use a ½ inch socket to remove the nuts securing the five scraper blade mounting bolts.
5
Remove the bolts and detach the old blade.
6
Install the new scraper blade by aligning it on the blower housing and securing it with the bolts and nuts.
7
Reinsert the slide shoe mounting bolts from inside the housing and secure them with the washers and nuts.
8
With the new scraper blade installed, carefully tip the snowblower back to its upright position and return the start key to the engine.
Description
This video provides step-by-step instructions for replacing the scraper blade on Ariens snowblowers. The most common reason for replacing the scraper blade is if it is worn.
All of the information in this scraper blade replacement video is applicable to the following brands: Ariens
Tools used: socket wrench
All of the information in this scraper blade replacement video is applicable to the following brands: Ariens
Tools used: socket wrench
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the engine.
2
To replace the scraper blade, your first step is to carefully tip the snowblower back so it rests on its handle bars.
3
Next, use a 9/16th inch socket to remove the nuts and washers securing the rear slide shoe mounting bolts on both sides of the blower housing and pull out the bolts.
4
Now use a ½ inch socket to remove the nuts securing the five scraper blade mounting bolts.
5
Remove the bolts and detach the old blade.
6
Install the new scraper blade by aligning it on the blower housing and securing it with the bolts and nuts.
7
Reinsert the slide shoe mounting bolts from inside the housing and secure them with the washers and nuts.
8
With the new scraper blade installed, carefully tip the snowblower back to its upright position and return the start key to the engine.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com