Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Power Cord Replacement W10857676 
Whirlpool Matrix Refrigerator Power Cord Replacement W10857676
Skill Level
Total Parts Cost
$52.49Estimated Savings
$112.5005:42
- Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Power Cord Assembly Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Disconnect the wire connecter from the compressor along with the grounding wire.
6
Lift the retaining tab up to disconnect the main wire harness.
7
Depress the tab to disconnect the wire connecter from the condenser fan motor.
8
Unthread the screws to release the water inlet valve bracket from the frame to make it easier to disconnect the wire connecter from the valve.
9
Unthread the screws securing the condenser fan motor mounting bracket.
10
Pull the bracket forward.
11
Detach the drain tube extension.
12
Detach the three wire retainers from the frame.
13
You can now fully remove the old power cord assembly
14
Install the new power cord assembly by first snapping the three wire retainers into the frame.
15
Connect the inlet valve wire connecter.
16
Reposition the inlet valve bracket and secure it to the frame with the screws.
17
Reposition the condenser fan motor mounting bracket.
18
Thread the screws.
19
Connect the condenser fan motor wire connecter.
20
Connect the main wire harness.
21
Connect the compressor wire connecter along with the grounding wire.
22
Reinstall the drain tube extension.
23
Slide the retaining clamp onto the power cord and thread the screw to secure it to the frame.
24
Secure the grounding wire as well.
25
Reinstall the access panel.
26
Push the refrigerator back against the wall and lower the front leveling legs.
27
Plug the new power cord in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Power Cord Assembly Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Disconnect the wire connecter from the compressor along with the grounding wire.
6
Lift the retaining tab up to disconnect the main wire harness.
7
Depress the tab to disconnect the wire connecter from the condenser fan motor.
8
Unthread the screws to release the water inlet valve bracket from the frame to make it easier to disconnect the wire connecter from the valve.
9
Unthread the screws securing the condenser fan motor mounting bracket.
10
Pull the bracket forward.
11
Detach the drain tube extension.
12
Detach the three wire retainers from the frame.
13
You can now fully remove the old power cord assembly
14
Install the new power cord assembly by first snapping the three wire retainers into the frame.
15
Connect the inlet valve wire connecter.
16
Reposition the inlet valve bracket and secure it to the frame with the screws.
17
Reposition the condenser fan motor mounting bracket.
18
Thread the screws.
19
Connect the condenser fan motor wire connecter.
20
Connect the main wire harness.
21
Connect the compressor wire connecter along with the grounding wire.
22
Reinstall the drain tube extension.
23
Slide the retaining clamp onto the power cord and thread the screw to secure it to the frame.
24
Secure the grounding wire as well.
25
Reinstall the access panel.
26
Push the refrigerator back against the wall and lower the front leveling legs.
27
Plug the new power cord in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Power Cord
$52.49
Total$0.00
Related Articles & Videos
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
05:05
Part Replacement
Whirlpool Matrix Refrigerator Freezer Thermistor Replacement WPW10384183
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com