Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Ice Maker Fill Tube Replacement WPW10601149 
Whirlpool Matrix Refrigerator Ice Maker Fill Tube Replacement WPW10601149
Skill Level
Total Parts Cost
$5.00Estimated Savings
$112.5003:22
- Description
This video provides step-by-step repair instructions for replacing the ice maker fill tube on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is not producing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Ice Maker Fill Tube Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
To move the refrigerator away from the wall, raise both front leveling legs.
7
Open the freezer door and remove the ice bucket.
8
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
9
Loosen the two upper screws.
10
With the screws loosened, you can lift the ice maker off of the screws.
11
Pull the extension tube off of the old fill tube.
12
Next, remove the pinch clamp securing the water supply line to the fill tube and pull the line free.
13
Unthread the mounting screw and remove the old fill tube.
14
Before you install the new ice maker fill tube, make sure to slide on the gasket.
15
Now insert the new fill tube through the hole in the rear panel?and thread the mounting screw to secure.
16
Confirm that the metal insert is still in place in the water line and then insert the line into the new fill tube.
17
Use a new clamp to secure.
18
Returning to the freezer compartment, slide the extension onto the new fill tube.
19
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
20
Tighten the screws.
21
Thread and tighten the lower screw.
22
Replace the ice bucket.
23
Push the refrigerator back against the wall and lower the front leveling legs.
24
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice maker fill tube on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is not producing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Ice Maker Fill Tube Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
To move the refrigerator away from the wall, raise both front leveling legs.
7
Open the freezer door and remove the ice bucket.
8
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
9
Loosen the two upper screws.
10
With the screws loosened, you can lift the ice maker off of the screws.
11
Pull the extension tube off of the old fill tube.
12
Next, remove the pinch clamp securing the water supply line to the fill tube and pull the line free.
13
Unthread the mounting screw and remove the old fill tube.
14
Before you install the new ice maker fill tube, make sure to slide on the gasket.
15
Now insert the new fill tube through the hole in the rear panel?and thread the mounting screw to secure.
16
Confirm that the metal insert is still in place in the water line and then insert the line into the new fill tube.
17
Use a new clamp to secure.
18
Returning to the freezer compartment, slide the extension onto the new fill tube.
19
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
20
Tighten the screws.
21
Thread and tighten the lower screw.
22
Replace the ice bucket.
23
Push the refrigerator back against the wall and lower the front leveling legs.
24
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Fill Tube
$5.00
Total$0.00
Related Articles & Videos
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
05:05
Part Replacement
Whirlpool Matrix Refrigerator Freezer Thermistor Replacement WPW10384183
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com