Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Right Front Roller Replacement W11096015 
Whirlpool Matrix Refrigerator Right Front Roller Replacement W11096015
Skill Level
Total Parts Cost
$68.04Estimated Savings
$112.5003:57
- Description
This video provides step-by-step repair instructions for replacing the right front roller on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Right Front Roller Assembly Replacement
3
Tools needed: 5/16th inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
Your first step is to detach the top hinge cover.
7
Support the door and use a 5/16th inch socket or nut driver to unthread the three mounting screws securing the hinge.
8
Heavy
9
Lift off the hinge and have an assistant help you to remove the freezer door.
10
Now use a 5/16th inch wrench or nut driver to fully unthread the left side screw securing the center hinge assembly.
11
Loosen the two screws on the right.
12
Open the refrigerator door and you can remove the center hinge assembly.
13
Heavy
14
Now have the assistant help you to fully remove the refrigerator door.
15
Lift up the right side of the appliance and support it.
16
Remove the hinge pin if necessary.
17
Fully unthread the leveling leg.
18
Now unthread the two lower screws as well as the two front screws to fully release the old roller assembly.
19
Install the new roller assembly by aligning it on the frame, then thread the front and lower screws to secure.
20
Thread the leveling leg in.
21
Remove the support and lower the appliance.
22
With the spacer in place, make sure the hinge pin is properly inserted into the lower hinge bracket, then reposition the refrigerator door on the hinge pin.
23
Reinsert the center hinge assembly?s lower pin into the refrigerator door as you align the assembly under the right side screws.
24
Thread the screw on the left.
25
Tighten the right side screws.
26
Make sure the spacer is in place on the upper pin and then realign the freezer door on the pin.
27
Confirm the spacer is place then reposition the top hinge and thread the screws to secure.
28
Snap on the cover.
29
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the right front roller on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Right Front Roller Assembly Replacement
3
Tools needed: 5/16th inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
Your first step is to detach the top hinge cover.
7
Support the door and use a 5/16th inch socket or nut driver to unthread the three mounting screws securing the hinge.
8
Heavy
9
Lift off the hinge and have an assistant help you to remove the freezer door.
10
Now use a 5/16th inch wrench or nut driver to fully unthread the left side screw securing the center hinge assembly.
11
Loosen the two screws on the right.
12
Open the refrigerator door and you can remove the center hinge assembly.
13
Heavy
14
Now have the assistant help you to fully remove the refrigerator door.
15
Lift up the right side of the appliance and support it.
16
Remove the hinge pin if necessary.
17
Fully unthread the leveling leg.
18
Now unthread the two lower screws as well as the two front screws to fully release the old roller assembly.
19
Install the new roller assembly by aligning it on the frame, then thread the front and lower screws to secure.
20
Thread the leveling leg in.
21
Remove the support and lower the appliance.
22
With the spacer in place, make sure the hinge pin is properly inserted into the lower hinge bracket, then reposition the refrigerator door on the hinge pin.
23
Reinsert the center hinge assembly?s lower pin into the refrigerator door as you align the assembly under the right side screws.
24
Thread the screw on the left.
25
Tighten the right side screws.
26
Make sure the spacer is in place on the upper pin and then realign the freezer door on the pin.
27
Confirm the spacer is place then reposition the top hinge and thread the screws to secure.
28
Snap on the cover.
29
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Roller
$68.04
Total$0.00
Related Articles & Videos
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
05:05
Part Replacement
Whirlpool Matrix Refrigerator Freezer Thermistor Replacement WPW10384183
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com