Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Ice Machine Reservoir Fill Tube Replacement WPW10678299 
KitchenAid Ice Machine Reservoir Fill Tube Replacement WPW10678299
Skill Level
Total Parts Cost
$46.67Estimated Savings
$112.5005:57
- Description
This video provides step-by-step instructions for replacing the reservoir fill tube on a KitchenAid ice machine (model KUID508ESS2). The most common reason for replacing this part is if the ice machine is not making ice.
All of the information in this video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Ice Machine Reservoir Fill Tube Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
Water
7
turn off the water supply to the appliance
8
Heavy
9
have an assistant help you to move the appliance away from the wall
10
use a quarter-inch socket to unthread the screws securing the access cover to the control panel
11
use a putty knife to help pry the cover free
12
disconnect the ice bin thermistor wire connecter along with the cutting grid wire connecter
13
unthread the cutting grid wire connecter
14
unthread the two mounting screws securing the grid to the bracket and liner
15
slide out the grid
16
detach the reservoir fill tube from the circulation pump cover
17
use a t-20 torx but to unthread the front screws securing the top panel
18
use a quarter-inch socket to unthread the rear screws
19
uninstall the water filter
20
Heavy
21
lift the top panel up and have an assistant support it
22
use a t-15 torx bit to unthread the screws to release the filter housing cover
23
pull the filter housing out
24
use a half-inch wrench to depress the retaining ring to detach the reservoir fill tube from the housing
25
fully unthread the lower screw securing the control housing
26
loosen the upper screw and pull the fill tube free
27
install the new tube by feeding the straight end behind the evaporator assembly
28
secure the fill tube under the control housing
29
tighten the upper screw and thread the lower screw
30
insert the fill tube into the filter housing port until fully seated and reposition the filter housing
31
realign the housing on the panel and thread all of the screws
32
reposition the top panel
33
reinstall the water filter
34
rethread the front and rear screws to secure the top panel
35
snap the new fill tube into the notch on the circulation pump cover
36
make sure the right side spacer is intact
37
align the grid on the bracket and liner then thread the mounting screws
38
reconnect the cutting grid wire connecter and the thermistor wire connecter
39
reinstall the access cover by aligning the bottom edge first so the ice scoop housing rests on top of the cover
40
secure with screws
41
Heavy
42
move the appliance back into place
43
Water
44
turn the water supply back on
45
Shock
46
plug the power cord back in
Description
This video provides step-by-step instructions for replacing the reservoir fill tube on a KitchenAid ice machine (model KUID508ESS2). The most common reason for replacing this part is if the ice machine is not making ice.
All of the information in this video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Ice Machine Reservoir Fill Tube Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
Water
7
turn off the water supply to the appliance
8
Heavy
9
have an assistant help you to move the appliance away from the wall
10
use a quarter-inch socket to unthread the screws securing the access cover to the control panel
11
use a putty knife to help pry the cover free
12
disconnect the ice bin thermistor wire connecter along with the cutting grid wire connecter
13
unthread the cutting grid wire connecter
14
unthread the two mounting screws securing the grid to the bracket and liner
15
slide out the grid
16
detach the reservoir fill tube from the circulation pump cover
17
use a t-20 torx but to unthread the front screws securing the top panel
18
use a quarter-inch socket to unthread the rear screws
19
uninstall the water filter
20
Heavy
21
lift the top panel up and have an assistant support it
22
use a t-15 torx bit to unthread the screws to release the filter housing cover
23
pull the filter housing out
24
use a half-inch wrench to depress the retaining ring to detach the reservoir fill tube from the housing
25
fully unthread the lower screw securing the control housing
26
loosen the upper screw and pull the fill tube free
27
install the new tube by feeding the straight end behind the evaporator assembly
28
secure the fill tube under the control housing
29
tighten the upper screw and thread the lower screw
30
insert the fill tube into the filter housing port until fully seated and reposition the filter housing
31
realign the housing on the panel and thread all of the screws
32
reposition the top panel
33
reinstall the water filter
34
rethread the front and rear screws to secure the top panel
35
snap the new fill tube into the notch on the circulation pump cover
36
make sure the right side spacer is intact
37
align the grid on the bracket and liner then thread the mounting screws
38
reconnect the cutting grid wire connecter and the thermistor wire connecter
39
reinstall the access cover by aligning the bottom edge first so the ice scoop housing rests on top of the cover
40
secure with screws
41
Heavy
42
move the appliance back into place
43
Water
44
turn the water supply back on
45
Shock
46
plug the power cord back in
Applicable Product Model
Related Articles & Videos
02:16
Part Replacement
KitchenAid Ice Machine Ice Bin Thermistor Replacement WPW10511923
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com