DescriptionThis video provides step-by-step repair instructions for replacing the water filter switch on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the water dispenser is not working.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Water Filter Switch Replacement
3
heavy, sharp, shock, water
6
depress the water filter cover to release
7
rotate the filter clockwise to remove
8
using the quarter-inch socket or nut driver, unthread the two screws securing the water reservoir access panel
9
pull the panel down using a screwdriver to help detach the mounting posts
10
disconnect the LED light wire connecter and set the panel aside
11
use a small flat-head screwdriver to pry off the water line retainer
12
depress the tab to release the old switch
13
install the new switch by snapping it into place on the reservoir housing
14
connect the wires to the terminals
15
reinstall the water reservoir access panel by first connecting the LED light wire connecter
16
insert the three tabs at the back into the slots then snap the mounting posts into place
18
reinstall the water filter and close the cover
20
plug the power cord back in