Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid 5 Door Refrigerator Secondary Dual Water Inlet Valve Replacement WPW10341329 
KitchenAid 5 Door Refrigerator Secondary Dual Water Inlet Valve Replacement WPW10341329
Skill Level
Total Parts Cost
$74.94Estimated Savings
$112.5003:34
- Description
This video provides step-by-step repair instructions for replacing the secondary dual water inlet valve on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Secondary Dual Water Valve Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
depress the water filter cover to release
7
rotate the filter clockwise to remove
8
using the quarter-inch socket or nut driver, unthread the two screws securing the water reservoir access panel
9
pull the panel down using a screwdriver to help detach the mounting posts
10
disconnect the LED light wire connecter and set the panel aside
11
use a small flat-head screwdriver to pry off the water line retainer
12
use a half-inch wrench to depress the retaining rings to release the inlet and outlet water lines from the filter housing ports
13
detach the valve from the reservoir housing
14
disconnect the wire connecters along with the grounding wire
15
depress the retaining ring to release the reservoir water line from the valve post and fully remove the reservoir
16
insert the reservoir water line into the appropriate valve port until fully seated
17
connect the wire connecters to the solenoid terminals
18
connect the grounding wire
19
snap the valve into place in the housing
20
fully insert the two water lines into the valve ports
21
replace the retainers
22
reinstall the water reservoir access panel by first connecting the LED light wire connecter
23
insert the three tabs at the back into the slots then snap the mounting posts into place
24
rethread the screws
25
align the tab on the water filter with the notch in the housing and rotate the filter clockwise until it locks in place then close the cover
26
Shock
27
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the secondary dual water inlet valve on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Secondary Dual Water Valve Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
depress the water filter cover to release
7
rotate the filter clockwise to remove
8
using the quarter-inch socket or nut driver, unthread the two screws securing the water reservoir access panel
9
pull the panel down using a screwdriver to help detach the mounting posts
10
disconnect the LED light wire connecter and set the panel aside
11
use a small flat-head screwdriver to pry off the water line retainer
12
use a half-inch wrench to depress the retaining rings to release the inlet and outlet water lines from the filter housing ports
13
detach the valve from the reservoir housing
14
disconnect the wire connecters along with the grounding wire
15
depress the retaining ring to release the reservoir water line from the valve post and fully remove the reservoir
16
insert the reservoir water line into the appropriate valve port until fully seated
17
connect the wire connecters to the solenoid terminals
18
connect the grounding wire
19
snap the valve into place in the housing
20
fully insert the two water lines into the valve ports
21
replace the retainers
22
reinstall the water reservoir access panel by first connecting the LED light wire connecter
23
insert the three tabs at the back into the slots then snap the mounting posts into place
24
rethread the screws
25
align the tab on the water filter with the notch in the housing and rotate the filter clockwise until it locks in place then close the cover
26
Shock
27
plug the power cord back in
Applicable Product Model
Parts Needed
Water Inlet Valve
$74.94
Total$0.00
Related Articles & Videos
14:37
Part Replacement
KitchenAid 5 Door Refrigerator Evaporator Fan Motor Replacement W11087438
01:42
Part Replacement
KitchenAid 5 Door Refrigerator LED Light Assembly Replacement W10908166
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com