Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid 5 Door Refrigerator Ice Box Fan Motor Replacement W10846539 
KitchenAid 5 Door Refrigerator Ice Box Fan Motor Replacement W10846539
Skill Level
Total Parts Cost
$141.22Estimated Savings
$112.5005:42
- Description
This video provides step-by-step repair instructions for replacing the ice box fan motor on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the ice maker is not producing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Ice Box Fan Motor Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
depress the water filter cover to release
7
rotate the filter clockwise to remove
8
using the quarter-inch socket or nut driver, unthread the two screws securing the water reservoir access panel
9
pull the panel down using a screwdriver to help detach the mounting posts
10
disconnect the LED light wire connecter and set the panel aside
11
use a small flat-head screwdriver to pry off the water line retainer
12
use a half-inch wrench to depress the retaining rings to release the inlet and outlet water lines from the filter housing ports
13
disconnect all of the ice box wire connecters
14
remove the upper left shelf
15
use a putty knife or flat-head screwdriver to depress the tabs to release the ice box's front cover and disconnect the wire connecter
16
unthread the two mounting screws securing the ice box
17
pull the ice box forwards and down to fully release
18
unthread all of the screws securing the ice maker cover
19
partially lift out the ice maker to move the cover out of the way
20
lift off the foam block
21
disconnect the wire harness and fully remove the old fan motor
22
install the new ice box fan motor by positioning it in the housing
23
connect the wire harness and replace the foam block
24
reposition the ice maker as necessary
25
realign the cover and rethread the screws
26
reinstall the ice box by aligning the hooks on top with the notches in the liner and pushing the ice box back
27
replace the screws
28
reinstall the front cover by connecting the wire connecter and aligning the top edge and snapping into place
29
replace the upper shelf
30
insert the ne fill tube into the valve port
31
snap the water line retainer into place
32
reinstall the water reservoir access panel by first connecting the LED light wire connecter
33
insert the three tabs at the back into the slots then snap the mounting posts into place
34
rethread the screws
35
reinstall the water filter and close the cover
36
Shock
37
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the ice box fan motor on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the ice maker is not producing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Ice Box Fan Motor Replacement
3
heavy, sharp, shock, water
4
Shock
5
unplug the power cord
6
depress the water filter cover to release
7
rotate the filter clockwise to remove
8
using the quarter-inch socket or nut driver, unthread the two screws securing the water reservoir access panel
9
pull the panel down using a screwdriver to help detach the mounting posts
10
disconnect the LED light wire connecter and set the panel aside
11
use a small flat-head screwdriver to pry off the water line retainer
12
use a half-inch wrench to depress the retaining rings to release the inlet and outlet water lines from the filter housing ports
13
disconnect all of the ice box wire connecters
14
remove the upper left shelf
15
use a putty knife or flat-head screwdriver to depress the tabs to release the ice box's front cover and disconnect the wire connecter
16
unthread the two mounting screws securing the ice box
17
pull the ice box forwards and down to fully release
18
unthread all of the screws securing the ice maker cover
19
partially lift out the ice maker to move the cover out of the way
20
lift off the foam block
21
disconnect the wire harness and fully remove the old fan motor
22
install the new ice box fan motor by positioning it in the housing
23
connect the wire harness and replace the foam block
24
reposition the ice maker as necessary
25
realign the cover and rethread the screws
26
reinstall the ice box by aligning the hooks on top with the notches in the liner and pushing the ice box back
27
replace the screws
28
reinstall the front cover by connecting the wire connecter and aligning the top edge and snapping into place
29
replace the upper shelf
30
insert the ne fill tube into the valve port
31
snap the water line retainer into place
32
reinstall the water reservoir access panel by first connecting the LED light wire connecter
33
insert the three tabs at the back into the slots then snap the mounting posts into place
34
rethread the screws
35
reinstall the water filter and close the cover
36
Shock
37
plug the power cord back in
Applicable Product Model
Parts Needed
Fan Motor
$141.22
Total$0.00
Related Articles & Videos
14:37
Part Replacement
KitchenAid 5 Door Refrigerator Evaporator Fan Motor Replacement W11087438
01:42
Part Replacement
KitchenAid 5 Door Refrigerator LED Light Assembly Replacement W10908166
09:31
Part Replacement
KitchenAid 5 Door Refrigerator Freezer Evaporator Fan Motor Replacement W11249952
12:07
Part Replacement
KitchenAid 5 Door Refrigerator Pantry Drawer Wire Harness Replacement W11170612
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com