DescriptionThis video provides step-by-step repair instructions for replacing the dispenser water line on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the water dispenser is not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Dispenser Water Line Replacement
3
heavy, sharp, shock, water
6
unthread the Philips-head screw to release the left top hinge cover
7
lift up the clasp and detach the dispenser water line from the supply line
8
use a small flat-head screwdriver to depress the tabs on the bottom to release the dispenser user interface assembly
9
disconnect the three wire connecters to fully release the assembly
10
detach the dispenser water line from the ice door assembly
12
pull the old water line free
13
feed the straight end of the new water line up through the channel in the door
14
snap the opposite end into place on the ice door assembly
15
reinstall the user interface assembly by first connecting the wire connecters to the appropriate terminals
16
insert the upper tabs into the slots in the housing and snap the assembly into place
17
attach the new water line to the water supply line
18
replace the hinge cover and secure with the screw
20
plug the power cord back in