DescriptionThis video provides step-by-step repair instructions for replacing the condenser fan motor on a KitchenAid 5 Door Refrigerator (Model KRMF706ESS01). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions1
KitchenAid Five-Door Refrigerator - KRMF706ESS01
2
Refrigerator Condenser Fan Motor Replacement
3
heavy, sharp, shock, water
6
open the freezer drawer and pull the base grille forward to remove
7
use a quarter-inch socket or nut driver to rotate the brake feet counter-clockwise to raise them
9
you can now roll the appliance forward
11
pull the condenser fan blade off of the motor shaft
12
use a 5/16th inch wrench to unthread the two mounting screws securing the fan motor to the bracket
13
install the new condenser fan motor by connecting the wire connecter
14
then align the motor on the bracket and thread the screws to secure
15
slide the fan blade onto the motor shaft until fully seated
16
reinstall the access panel
18
push the refrigerator back against the wall
19
lower the front leveling legs until they are in contact with the floor
20
replace the base grille with the leveling assemblies then snap the grille into place
22
plug the power cord back in