Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairTroy-Bilt Snowblower Ignition Switch Replacement #951-10637
Troy-Bilt Snowblower Ignition Switch Replacement #951-10637
Skill Level
Total Parts Cost
$16.47Estimated Savings
$112.5000:48
- Description
This video provides step-by-step instructions for replacing the ignition switch on Troy-Bilt snowblowers. The most common reason to replace the ignition switch is if the snowblower will not start because the ignition switch does not have continuity.
All of the information in this ignition switch replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: none
All of the information in this ignition switch replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: none
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the ignition switch, your first step is to release the locking tab and detach the switch wire harness.
3
Next, depress the tabs on the sides of the ignition switch and pull the old switch out.
4
Install the new ignition switch by aligning it with the housing and snapping it into place.
5
Attach the wire harness.
6
With the new ignition switch installed you can now insert the new start key in the ignition.
Description
This video provides step-by-step instructions for replacing the ignition switch on Troy-Bilt snowblowers. The most common reason to replace the ignition switch is if the snowblower will not start because the ignition switch does not have continuity.
All of the information in this ignition switch replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: none
All of the information in this ignition switch replacement video is applicable to the following brands: MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Yard-Man, Huskee
Tools used: none
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the ignition switch, your first step is to release the locking tab and detach the switch wire harness.
3
Next, depress the tabs on the sides of the ignition switch and pull the old switch out.
4
Install the new ignition switch by aligning it with the housing and snapping it into place.
5
Attach the wire harness.
6
With the new ignition switch installed you can now insert the new start key in the ignition.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com