DescriptionThis video provides step-by-step repair instructions for replacing the condenser fan blade on a Frigidaire refrigerator (Model FFTR1814TW8). The most common reason for replacing the condenser fan blade is when the refrigerator is noisy or loud.
All of the information for this refrigerator condenser fan blade replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
Step-By-Step Instructions1
Frigidaire Refrigerator - FFTR1814TW8
2
Refrigerator Condenser Fan Blade Replacement
3
Heavy, Sharp, Shock, Water
6
if applicable, shut off the water supply valve as well
9
have an assistant help you to roll the refrigerator away from the wall
10
if necessary, unthread the water supply line from the inlet valve
11
use a quarter-inch socket or nut driver to unthread the three screws to release the lower rear access panel
13
reach in and push the old condenser fan blade off of the motor shaft
14
align the new blade on the motor shaft then push until it is fully seated
15
reinstall the access panel and reattach the water supply line if applicable
16
secure the water line retainer under the right side access panel screw
18
push the refrigerator back against the wall
20
turn the water supply back on if applicable
21
plug the power cord back in