Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Dishwasher Pump Inlet Plate Replacement (part 807111601)
Frigidaire Dishwasher Pump Inlet Plate Replacement (part 807111601)
Skill Level
Total Parts Cost
$34.62Estimated Savings
$112.5001:46
- Description
This video provides step-by-step repair instructions for replacing the pump inlet plate on Frigidaire dishwasher model #FGID2466QF7A. The most common reason for replacing the pump inlet plate is if has broken or is damaged.
All of the information for this pump inlet plate replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: T-20 Torx bit.
All of the information for this pump inlet plate replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: T-20 Torx bit.
Step By Step Instructions
1
Dishwasher Pump Inlet Plate Replacement
2
Tools Needed
3
You will need a T-20 Torx bit for this procedure.
4
Fully remove the lower dishrack and pull the wash arm assembly straight up to remove.
5
Rotate the coarse filter and wash arm support counter-clockwise to detach from the sump.
6
Remove the fine filter ring and filter cup assembly.
7
"Next, use a T-20 Torx bit to unthread the two pump cover mounting screws to release the old pump inlet plate."
8
"Install the new pump inlet plate by positioning it on the sump, then thread the two mounting screws."
9
Reposition the filter ring and filter cup assembly in the sump so the cup aligns with the drain pump inlet.
10
"Confirm the filter ring is flush with the sump, then align the coarse filter with the wash arm support."
11
Position the assembly in the sump and rotate clockwise to lock it into place.
12
Realign the arm assembly on the support then snap it into place.
13
Replace the lower dishrack.
14
Congrats! Your dishwasher is ready for use.
Description
This video provides step-by-step repair instructions for replacing the pump inlet plate on Frigidaire dishwasher model #FGID2466QF7A. The most common reason for replacing the pump inlet plate is if has broken or is damaged.
All of the information for this pump inlet plate replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: T-20 Torx bit.
All of the information for this pump inlet plate replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: T-20 Torx bit.
Step-By-Step Instructions
1
Dishwasher Pump Inlet Plate Replacement
2
Tools Needed
3
You will need a T-20 Torx bit for this procedure.
4
Fully remove the lower dishrack and pull the wash arm assembly straight up to remove.
5
Rotate the coarse filter and wash arm support counter-clockwise to detach from the sump.
6
Remove the fine filter ring and filter cup assembly.
7
"Next, use a T-20 Torx bit to unthread the two pump cover mounting screws to release the old pump inlet plate."
8
"Install the new pump inlet plate by positioning it on the sump, then thread the two mounting screws."
9
Reposition the filter ring and filter cup assembly in the sump so the cup aligns with the drain pump inlet.
10
"Confirm the filter ring is flush with the sump, then align the coarse filter with the wash arm support."
11
Position the assembly in the sump and rotate clockwise to lock it into place.
12
Realign the arm assembly on the support then snap it into place.
13
Replace the lower dishrack.
14
Congrats! Your dishwasher is ready for use.
Applicable Product Model
Related Articles & Videos
00:48
Part Replacement
Frigidaire Dishwasher Center Wash Arm Assembly Replacement (part 5304506740)
01:08
Part Replacement
Frigidaire Dishwasher Bottom Tank Gasket Replacement (part 5304500204)
07:11
Part Replacement
Frigidaire Dishwasher Circulation Pump & Motor Replacement (part 154853801)
04:55
Part Replacement
Frigidaire Dishwasher Control Panel Replacement (part 5304520552)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com