DescriptionThis video provides step-by-step repair instructions for replacing the door handle on Frigidaire dishwasher model #FGID2466QF7A.
All of the information for this door handle replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: Phillips-head screwdriver, & a 7/16th inch socket or a wrench.
Step-By-Step Instructions1
Frigidaire Dishwasher - Model FGID2466QF7A
2
Dishwasher Door Handle Replacement
4
"You will need a phillips-head screwdriver, a 7/16th inch socket or wrench, qu0 Torx bit for this procedure, and you may need assistance."
5
Be sure to turn off the power to the appliance.
6
Open the door and use a phillips-head screwdriver to unthread all four screws securing the outer door panel.
7
"With the screws unthreaded, you can pull the panel down to detach."
8
Use a 7/16th inch socket or wrench to unthread the nuts to release the old door handle.
9
Install the new door handle by aligning it on the door panel with the curved portion of the ends facing downward.
10
"Make sure the support plates are in place, then thread and tighten the nuts."
11
Reinstall the outer door panel by aligning it on the inner panel then slide up.
12
Thread the four mounting screws to secure.
13
Turn the power supply back on.
14
Congrats! Your dishwasher is ready for use.