Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEvaporator Fan Motor Mount (part 241563601) - Frigidaire Refrigerator Repair Help
Evaporator Fan Motor Mount (part 241563601) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$14.74Estimated Savings
$112.5003:56
- Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor mount on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator evaporator fan motor mount replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
All of the information for this refrigerator evaporator fan motor mount replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
Step By Step Instructions
1
Frigidaire Refrigerator - Model FFSS2315TS0
2
Refrigerator Evaporator Fan Motor Mount Replacement
3
Tools Needed
4
You will need a quarter-inch socket or nut driver and a flat-head screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord.
7
Remove all of the freezer compartment shelving along with the bottom drawer.
8
Use a quarter-inch socket or nut driver to unthread the four screws securing the lower evaporator cover.
9
Sharp
10
Slide the cover up to remove.
11
Unthread the two screws securing the middle of the upper cover.
12
You can now lift and support the cover to access the evaporator components.
13
Lift out the evaporator fan motor assembly and depress the tabs to disconnect the wire connecter.
14
Pull off the fan blade.
15
Depress the tabs to release the motor retaining bracket and lift off the motor.
16
You can now remove the old mount if still intact.
17
You will need to slide the slinger off of the motor shaft before you can remove the front mount.
18
Install the new motor mount by positioning it on the rear dimple or sliding it onto the motor shaft.
19
Slide the slinger back onto the motor shaft if applicable.
20
Reposition the motor in the housing and replace the retaining bracket to secure.
21
Slide the fan blade onto the motor shaft until it is fully seated.
22
Returning to the freezer compartment, connect the wire connecter and position the fan motor housing.
23
Remove the support. Realign the upper evaporator cover and thread the two middle screws.
24
Slide the lower cover into place and rethread the four screws to secure.
25
Replace the bottom drawer and reinstall all of the shelving.
26
Plug the power cord back in.
27
Congrats! Your refrigerator is now ready for use.
Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor mount on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator evaporator fan motor mount replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
All of the information for this refrigerator evaporator fan motor mount replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
Step-By-Step Instructions
1
Frigidaire Refrigerator - Model FFSS2315TS0
2
Refrigerator Evaporator Fan Motor Mount Replacement
3
Tools Needed
4
You will need a quarter-inch socket or nut driver and a flat-head screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord.
7
Remove all of the freezer compartment shelving along with the bottom drawer.
8
Use a quarter-inch socket or nut driver to unthread the four screws securing the lower evaporator cover.
9
Sharp
10
Slide the cover up to remove.
11
Unthread the two screws securing the middle of the upper cover.
12
You can now lift and support the cover to access the evaporator components.
13
Lift out the evaporator fan motor assembly and depress the tabs to disconnect the wire connecter.
14
Pull off the fan blade.
15
Depress the tabs to release the motor retaining bracket and lift off the motor.
16
You can now remove the old mount if still intact.
17
You will need to slide the slinger off of the motor shaft before you can remove the front mount.
18
Install the new motor mount by positioning it on the rear dimple or sliding it onto the motor shaft.
19
Slide the slinger back onto the motor shaft if applicable.
20
Reposition the motor in the housing and replace the retaining bracket to secure.
21
Slide the fan blade onto the motor shaft until it is fully seated.
22
Returning to the freezer compartment, connect the wire connecter and position the fan motor housing.
23
Remove the support. Realign the upper evaporator cover and thread the two middle screws.
24
Slide the lower cover into place and rethread the four screws to secure.
25
Replace the bottom drawer and reinstall all of the shelving.
26
Plug the power cord back in.
27
Congrats! Your refrigerator is now ready for use.
Applicable Product Model
Parts Needed
Bushing
$14.74
Total$0.00
Related Articles & Videos
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help
04:17
Part Replacement
Water Inlet Valve (242252702) - Frigidaire Refrigerator Repair Help
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com