Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRefrigerator Fill Tube Assembly (part 241850615) - Frigidaire Refrigerator Repair Help
Refrigerator Fill Tube Assembly (part 241850615) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$48.44Estimated Savings
$112.5003:15
- Description
This video provides step-by-step repair instructions for replacing the refrigerator fill tube assembly on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator fill tube assembly replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, a half-inch wrench or adjustable wrench, & a 7/16th inch wrench.
All of the information for this refrigerator fill tube assembly replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, a half-inch wrench or adjustable wrench, & a 7/16th inch wrench.
Step By Step Instructions
1
Before you replace the fill tube assembly in your refrigerator…
2
…be sure to unplug the power cord.
3
Shut off the water supply as well.
4
Have an assistant help you to pull the appliance away from the wall.
5
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply line retainer to the rear panel.
6
Use a half-inch wrench or an adjustable wrench to unthread the compression nut to detach the supply line from the inlet valve – be prepared for some water to spill.
7
Now unthread the remaining screws securing the access panel.
8
Set the panel aside.
9
Use a 7/16th inch wrench to depress the retaining ring to release the fill tube water supply line from the inlet valve.
10
Remove any tape securing the supply line to the rear panel.
11
Now rotate the old fill tube counter-clockwise to detach it from the housing.
12
Install the new fill tube assembly…
13
…by inserting the fill tube into the housing and rotating until the tube is fully seated.
14
Fully insert the water supply line into the port on the inlet valve.
15
Use tape to secure the line to the rear panel.
16
Reinstall the access panel.
17
Attach the water supply line to the inlet valve by threading the compression nut – avoid overtightening the nut.
18
Slide on the retainer and secure it to the rear panel with the access panel mounting screw.
19
Push the refrigerator back against the wall.
20
Turn the water supply back on…
21
…plug the power cord back in…
22
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the refrigerator fill tube assembly on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator fill tube assembly replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, a half-inch wrench or adjustable wrench, & a 7/16th inch wrench.
All of the information for this refrigerator fill tube assembly replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, a half-inch wrench or adjustable wrench, & a 7/16th inch wrench.
Step-By-Step Instructions
1
Before you replace the fill tube assembly in your refrigerator…
2
…be sure to unplug the power cord.
3
Shut off the water supply as well.
4
Have an assistant help you to pull the appliance away from the wall.
5
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply line retainer to the rear panel.
6
Use a half-inch wrench or an adjustable wrench to unthread the compression nut to detach the supply line from the inlet valve – be prepared for some water to spill.
7
Now unthread the remaining screws securing the access panel.
8
Set the panel aside.
9
Use a 7/16th inch wrench to depress the retaining ring to release the fill tube water supply line from the inlet valve.
10
Remove any tape securing the supply line to the rear panel.
11
Now rotate the old fill tube counter-clockwise to detach it from the housing.
12
Install the new fill tube assembly…
13
…by inserting the fill tube into the housing and rotating until the tube is fully seated.
14
Fully insert the water supply line into the port on the inlet valve.
15
Use tape to secure the line to the rear panel.
16
Reinstall the access panel.
17
Attach the water supply line to the inlet valve by threading the compression nut – avoid overtightening the nut.
18
Slide on the retainer and secure it to the rear panel with the access panel mounting screw.
19
Push the refrigerator back against the wall.
20
Turn the water supply back on…
21
…plug the power cord back in…
22
…and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Fill Tube
$48.44
Total$0.00
Related Articles & Videos
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help
04:17
Part Replacement
Water Inlet Valve (242252702) - Frigidaire Refrigerator Repair Help
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com