Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRefrigerator Crushed Ice Solenoid Assembly (241675704) - Frigidaire Refrigerator Repair Help
Refrigerator Crushed Ice Solenoid Assembly (241675704) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$70.94Estimated Savings
$112.5004:10
- Description
This video provides step-by-step repair instructions for replacing the crushed ice solenoid assembly on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator crushed ice solenoid assembly replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
All of the information for this refrigerator crushed ice solenoid assembly replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
Step By Step Instructions
1
Before you replace the crushed ice solenoid assembly in your refrigerator…
2
…be sure to unplug the power cord.
3
Lift the ice bucket assembly up in the front then pull straight out.
4
Use a quarter-inch socket or nut driver to loosen the two icemaker mounting screws.
5
Lift the icemaker off of the screws and disconnect the wire connecter.
6
Next, unthread the lower screws securing the ice auger drive motor assembly.
7
Depress the tab to disconnect the wire harness.
8
You can now lift the assembly up and out.
9
Use a phillips-head screwdriver to unthread the two mounting screws securing the crushed ice solenoid assembly.
10
Lift out the assembly and unthread the screw to release the grounding wire.
11
Disconnect the power wires to fully release the old assembly.
12
Install the new solenoid assembly…
13
…by first connecting the power wires to the terminals.
14
Secure the grounding wire under the screw.
15
Keeping the plunger in place, align the assembly in the housing…
16
…then rethread the two mounting screws.
17
Reinstall the ice auger drive motor assembly by hooking the tabs into the slots in the support rails.
18
Thread the two lower screws.
19
Connect the wire harness.
20
Reinstall the icemaker by first connecting the wire connecter.
21
Align the icemaker on the fill tube and the mounting screws…
22
…then tighten the screws.
23
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
24
Plug the power cord back in…
25
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the crushed ice solenoid assembly on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator crushed ice solenoid assembly replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
All of the information for this refrigerator crushed ice solenoid assembly replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
Step-By-Step Instructions
1
Before you replace the crushed ice solenoid assembly in your refrigerator…
2
…be sure to unplug the power cord.
3
Lift the ice bucket assembly up in the front then pull straight out.
4
Use a quarter-inch socket or nut driver to loosen the two icemaker mounting screws.
5
Lift the icemaker off of the screws and disconnect the wire connecter.
6
Next, unthread the lower screws securing the ice auger drive motor assembly.
7
Depress the tab to disconnect the wire harness.
8
You can now lift the assembly up and out.
9
Use a phillips-head screwdriver to unthread the two mounting screws securing the crushed ice solenoid assembly.
10
Lift out the assembly and unthread the screw to release the grounding wire.
11
Disconnect the power wires to fully release the old assembly.
12
Install the new solenoid assembly…
13
…by first connecting the power wires to the terminals.
14
Secure the grounding wire under the screw.
15
Keeping the plunger in place, align the assembly in the housing…
16
…then rethread the two mounting screws.
17
Reinstall the ice auger drive motor assembly by hooking the tabs into the slots in the support rails.
18
Thread the two lower screws.
19
Connect the wire harness.
20
Reinstall the icemaker by first connecting the wire connecter.
21
Align the icemaker on the fill tube and the mounting screws…
22
…then tighten the screws.
23
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
24
Plug the power cord back in…
25
…and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
04:46
Part Replacement
Refrigerator Crushed Ice Solenoid (241675803) - Frigidaire Refrigerator Repair Help
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com