Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRefrigerator Evaporator Fan Motor (part 242077705 ) - Frigidaire Refrigerator Repair Help
Refrigerator Evaporator Fan Motor (part 242077705 ) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$90.73Estimated Savings
$112.5003:52
- Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator evaporator fan motor replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
All of the information for this refrigerator evaporator fan motor replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
Step By Step Instructions
1
Before you replace the evaporator fan motor in your refrigerator, be sure to unplug the power cord.
2
Remove all of the freezer compartment shelving along with the bottom drawer.
3
Use a quarter inch socket or nut driver to unthread the four screws securing the lower evaporator cover.
4
Slide the cover up to remove.
5
Next, unthread the two screws securing the middle of the upper cover.
6
You can now lift and support the cover to access the evaporator components.
7
Lift out the evaporator fan motor assembly and depress the tabs to disconnect the wire connector.
8
Pull off the fan blade.
9
Depress the tabs to release the motor retaining bracket and you can remove the old motor.
10
Prepare the new evaporator fan motor for installation by transferring the two motor mounts and the slinger from the old motor to the new one.
11
Position the motor in the housing and replace the retaining bracket to secure.
12
Slide the fan blade onto the motor shaft until it is fully seated.
13
Returning to the freezer compartment, connect the wire connector and position the fan motor housing.
14
Remove the support.
15
Realign the upper evaporator cover and thread the two middle screws.
16
Slide the lower cover into place and rethread the four screws to secure.
17
Replace the bottom drawer and reinstall all of the shelving.
18
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the evaporator fan motor on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator evaporator fan motor replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
All of the information for this refrigerator evaporator fan motor replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver.
Step-By-Step Instructions
1
Before you replace the evaporator fan motor in your refrigerator, be sure to unplug the power cord.
2
Remove all of the freezer compartment shelving along with the bottom drawer.
3
Use a quarter inch socket or nut driver to unthread the four screws securing the lower evaporator cover.
4
Slide the cover up to remove.
5
Next, unthread the two screws securing the middle of the upper cover.
6
You can now lift and support the cover to access the evaporator components.
7
Lift out the evaporator fan motor assembly and depress the tabs to disconnect the wire connector.
8
Pull off the fan blade.
9
Depress the tabs to release the motor retaining bracket and you can remove the old motor.
10
Prepare the new evaporator fan motor for installation by transferring the two motor mounts and the slinger from the old motor to the new one.
11
Position the motor in the housing and replace the retaining bracket to secure.
12
Slide the fan blade onto the motor shaft until it is fully seated.
13
Returning to the freezer compartment, connect the wire connector and position the fan motor housing.
14
Remove the support.
15
Realign the upper evaporator cover and thread the two middle screws.
16
Slide the lower cover into place and rethread the four screws to secure.
17
Replace the bottom drawer and reinstall all of the shelving.
18
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Evaporator Fan Motor
$90.73
Total$0.00
Related Articles & Videos
04:55
How This Part Works
Refrigerator Evaporator Fan Motor - How it Works & Installation Tips
05:34
Part Replacement
Evaporator Fan Motor Replacement (part 242077705) - Frigidaire Refrigerator Repair
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com