DescriptionThis video provides step-by-step instructions for replacing the fuel filter on Echo leaf blowers.
Step-By-Step Instructions1
Leaf Blower- Model PB580T
2
Leaf Blower Fuel Filter Replacement
3
"Step 1: Make sure the engine has cooled and the on/off switch is in the ""off"" position. "
4
Step 2: Perform this procedure with little or no fuel in the tank.
5
Step 3: Unthread the fuel tank cap and pull the retainer free of the tank.
6
Step 4: Use a wire with a hooked end to pull the fuel filter out.
7
Step 5: Slide the retaining spring away from the filter.
8
Step 6: Pull the old filter off of the fuel line.
9
Step 7: Install the new fuel filter by attaching the fuel line and slide the retaining spring toward the filter to secure.
10
Step 8: Push the new filter into the tank.
11
Step 9: Reinsert the fuel cap retainer into the tank then thread on the cap.
12
Step 10: Refill the fuel tank if necessary.
13
Congratulations! Your leaf blower should be ready for use.