Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Bail Arm Replacement (114-3780-03)
Toro Snowblower Bail Arm Replacement (114-3780-03)
Skill Level
Total Parts Cost
$22.48Estimated Savings
$112.5001:01
- Description
This video provides step-by-step repair instructions for replacing the bail arm on a Toro snowblower.
All of the information for this bail arm replacement video is applicable to the following brands: Toro
Tools used: None.
All of the information for this bail arm replacement video is applicable to the following brands: Toro
Tools used: None.
Step By Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Bail Arm Replacement
3
"Lift the clutch cable sleeve and unhook the cable adjuster from the spring, then detach the spring from the bail arm."
4
Depress the right side of the bail arm to release and fully remove the old arm.
5
"Install the new bail arm by inserting the left end into the outside hole in the handle, then insert the right end into the inside hole in the handle."
6
Hook the long end of the spring onto the bail arm.
7
Reattach the clutch cable adjuster to the short end of the spring.
8
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the bail arm on a Toro snowblower.
All of the information for this bail arm replacement video is applicable to the following brands: Toro
Tools used: None.
All of the information for this bail arm replacement video is applicable to the following brands: Toro
Tools used: None.
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Bail Arm Replacement
3
"Lift the clutch cable sleeve and unhook the cable adjuster from the spring, then detach the spring from the bail arm."
4
Depress the right side of the bail arm to release and fully remove the old arm.
5
"Install the new bail arm by inserting the left end into the outside hole in the handle, then insert the right end into the inside hole in the handle."
6
Hook the long end of the spring onto the bail arm.
7
Reattach the clutch cable adjuster to the short end of the spring.
8
Congrats! Your snowblower is ready for use.
Applicable Product Model
Parts Needed
Bail Control Arm
$22.48
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com