Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Auger Drive Belt Replacement 138-8723
Toro Snowblower Auger Drive Belt Replacement 138-8723
Skill Level
Total Parts Cost
$25.99Estimated Savings
$112.5002:08
- Description
This video provides step-by-step repair instructions for replacing the auger drive belt on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Auger Drive Belt Replacement
3
Tools Needed
4
You will need a 3/8th inch socke and a 7/16th inch socket for this procedure.
5
Use a 3/8th inch socket or nut driver to unthread the three mounting screws to release the belt cover.
6
Secure the auger and use a 7/16th inch socket to unthread the bolt securing the auger pulley.
7
Release the brake and remove the pulley and the old drive belt.
8
"Install the new auger drive belt by looping it around the auger pulley, then align the belt on the drive pulley and under the brake as you position the auger pulley on the shaft."
9
Slide on the washer then thread the bolt to secure the pulley.
10
"Confirm that the new belt is seated properly, then replace the belt cover and secure it with the screws."
11
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the auger drive belt on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Auger Drive Belt Replacement
3
Tools Needed
4
You will need a 3/8th inch socke and a 7/16th inch socket for this procedure.
5
Use a 3/8th inch socket or nut driver to unthread the three mounting screws to release the belt cover.
6
Secure the auger and use a 7/16th inch socket to unthread the bolt securing the auger pulley.
7
Release the brake and remove the pulley and the old drive belt.
8
"Install the new auger drive belt by looping it around the auger pulley, then align the belt on the drive pulley and under the brake as you position the auger pulley on the shaft."
9
Slide on the washer then thread the bolt to secure the pulley.
10
"Confirm that the new belt is seated properly, then replace the belt cover and secure it with the screws."
11
Congrats! Your snowblower is ready for use.
Applicable Product Model
Parts Needed
Drive Belt
$25.99
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com